Xerox DocuColor 7000AP System Administration Manual - page 55
Other manuals for DocuColor 7000AP:
Quick Start Manual, Release Notes, Supplementary Manual, User Manual
Manual is about: Xerox DocuColor 7000AP: User Guide
of
92
DocuColor 7000AP/8000AP System Administration Guide
1-51
1. Tools Mode
6. Evaluate the test prints by holding your 2 Sided output at eye
level near a light source. This will allow you to see the
registration marks for both Side 1 and Side 2 of the output.
a. If you determine that the registration between Side 1 and
Side 2 is significant and needs adjusting, proceed to the
Step 7.
b. If the registration between Side 1 and Side 2 is okay, stop
now:
– Touch the Close button to return to the Alignment
Profile window.
– Ensure that the Default button is selected and touch
the Close button.
– Exit Tools Mode.
7. Select the desired Alignment feature that you want to adjust.
Each of the above Alignment features is discussed on the
following pages.