Xerox DocuMate 3460 User Manual - page 114

Xerox DocuMate 3460

User’s Guide

114

6.

Select the scan configuration you want to use for scanning in the 

Select configuration

 list.

Click on the 

Edit

 button to open the Scan Configuration Properties window to configure any 

destination specific scanning options. 

Each destination that has per-scan configuration properties will be represented by its 

configuration tab in the One Touch Scan Configuration Properties window. Please refer to the 

destination instructions, as described in the previous section(s), for configuring destination 

specific options.

Click on 

OK

 when you are done making changes in this window.

7.

Click on 

OK

 on the One Touch Properties window.

8.

Load the document(s) in the scanner and start scanning with the button you set to scan to 

multiple destinations. 

The scanner starts scanning and when finished, the image is sent to each destination you selected in 

the One Touch Properties window.

Technical Note

•

The Still Image Client destination cannot be used with multiple destination scanning. This 

destination will be disabled when the 

Enable scanning to multiple destinations

 is selected.