Xerox DocuMate 3640 User Manual - page 89
Scanning from TWAIN
DocuMate 3640
User’s Guide
76
The Scan Info Box
The following figure shows the information on the Scan Info box.
Creating a New Advanced Interface Profile
You cannot change the settings of the preset profiles in the Advanced Interface. However, you can
create new profiles and save them for future use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for example, Black&White
Configurations/Custom.
2. Adjust the settings as required and then click the
Save As
button.
The Save Profile dialog box opens.
3. Type a name for the new profile and click
OK
. The name must be at least two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click
Save
.
3. If you want to delete the selected profile, click
Delete
.
Location of the top
left corner of the
image in the
Preview window.
Physical size of the
image to scan.
Size of the file of the
scanned image.
The space on your
computer’s hard drive.
Current location of
the pointer as you
drag it on the
Preview window.
Tabs for each selected area. Click a tab to
see the information for its area.
Click to remove the
selected area.