Xerox DocuMate 3640 User Manual - page 94
DocuMate 3640
User’s Guide
81
6
Scanning from ISIS
You can use the ISIS interface from QuickScan or any other application that will access the ISIS driver.
You received QuickScan with your scanner.
Note that the ISIS interface for each application varies depending on the application. Please refer to
that software application’s User Guide for instructions on scanning the ISIS interface. The QuickScan
User’s Guide is available on the installation disc that you received with the scanner.
Accessing the ISIS Interface in QuickScan
Open the QuickScan software to access the ISIS driver scanning options. Please note that you may see
the following warning message:
1. Please disregard the message and click
Continue
.
The ISIS drivers were installed correctly during the installation of your scanner.
The Scanner Selection dialog box will then appear.
2. Select
Xerox DocuMate 3640
from the list of scanners and click
OK
.
Your scanner is then ready to work with the ISIS driver.