Xerox DocuMate 5445 User Manual - page 20
Xerox
®
DocuMate
®
5445 / 5460
User’s Guide
20
Paper thickness switch—separates the rollers to allow for scanning thick items.
Power jack—Connects the power cord to the scanner.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Control Panel
LED number—shows the OneTouch function that will be used for scanning. You can view the scan settings for that
function in the OneTouch Properties window. When there is a hardware error, the LED number indicates what the
hardware error code is.
LED function button—tap the button to cycle through the 9 OneTouch scanning options.
Scan type function button—tap the button to change the scan type between Simplex (one-sided) and Duplex
(two-sided) scanning. The option you select here overrides the selected option in the OneTouch Properties window
when you scan by pressing the green start button.
Power button—turns the scanner power on or off. Press the button to turn the scanner on. Press and hold down
the button for a couple of seconds to turn the scanner off. This is the clear button on the control panel.
Reset button—returns the scan settings in TWAIN to the default settings. This is the yellow button on the control
panel.
Stop button—stops the scanner when scanning. This is the red button on the control panel.
Start button—starts scanning. This is the green button on the control panel.
Error light—this light will start flashing if the scanner experiences a hardware error.
3
LED function button
Stop button
LED Number
Reset button
4
1
5
2
Scan type function
button
Power button
8
6
7
Error light
Start button
2
3
4
5
6
7
8
1