Xerox Nuvera 144 EA roduction Systems Paper Manual - page 33
Xerox Nuvera
Tips by stock type
Paper Guide
3-3
Tips that apply to all stocks
Selection tips
•
Before ordering stock, check the latest Xerox Nuvera Media Compatibility Guide.
•
If you wish to run a paper that has not been recommended by Xerox, test a
small quantity before making a large purchase.
Storage tips
Refer to the Chapter 2 section on controlling moisture in paper.
Usage tips
•
To prevent leaving handling dents on sheets, handle stocks gently when loading
feeder trays.
•
To prevent damaging large size papers, handle partial reams only.
•
Stock that is cut unevenly may require fanning to improve performance.
•
If multifeeds occur, leave the stock in the tray and fan the lead and trail edges
of the stack.
–
Gently hold one side (lead or trail) of the stack to keep it from moving.
–
Gently lift the top four inches (10 centimeters) of the opposite side of the
stack, then allow the sheets to gently fan back down into the tray.
•
If the paper packaging does not indicate a paper loading direction, load paper
with the curl side down.
•
If jammed sheets exhibit damaged or folded lead edges, check the unloaded
(stored) paper from the same shipment to see if the paper is defective.
Bond (56 to 158 gsm)
Description
Bond papers are commonly used for letterheads, stationary, and business forms.
Properties include whiteness, uniform finish, durability, and good formation. Bond
papers accept ink readily and are easily erased.
Selection tips
Select a smooth paper with good formation for best image quality
Storage tips
Follow general guidelines in Chapter 2
.
Usage tips
Follow general usage tips in the beginning of this chapter.
Bristol (147 to 220 gsm)
Description
Solid or laminated heavyweight printing papers.
Selection tips
Select paper with a smooth finish for best image quality.
Storage tips
Follow general guidelines in Chapter 2.
Usage tips
If imaged sheets will be folded, place the image so the fold will be with the grain.