Xerox Nuvera 144 EA roduction Systems Paper Manual - page 34
Tips by stock type
Xerox Nuvera
3-4
Paper Guide
Carbonless
Description
A paper with an impact-sensitive coating that is used to produce multiple copies.
Selection tips
For best results, select paper that was designed for laser compatibility.
Storage tips
Follow general guidelines in Chapter 2, Managing your paper supply.
Usage tips
•
When 1-N output is selected, load the stock with the top sheet facing up.
•
When N-1 output is selected, load the stock with the top sheet facing down.
•
Carbonless paper should be run in simplex mode only.
•
Carbonless paper may cause additional contamination of paper path rolls which
can result in skew and paper jams. Additional cleaning time may be required by
the CSE during service depending on the percentage of carbonless stock run
versus non-carbonless stock.
Cover Coated (140 to 220 gsm)
Description
Coated, stiff papers that are commonly used for book covers, catalogs, brochures,
folders, and greeting cards. Usually coated on both sides with either a glossy or dull
finish. Properties include good image quality, folding qualities, and durability.
Selection tips
For best results, select paper that was designed for laser compatibility.
Storage tips
Handle with care. Coating increases weight and susceptibility to damage.
Usage tips
•
When printing on C1S (coated on one side) cover, load the stock with the coated
side facing up.
•
When printing on C1S cover, ensure that it is at least 160 gsm
Cover Uncoated (106 to 220 gsm)
Description
Uncoated, stiff papers that are commonly used for book covers, catalogs, brochures,
folders and greeting cards. Uncoated cover papers often match the color and finish
of corresponding text papers.
Selection tips
For best results, select paper that was designed for laser compatibility.
Storage tips
Follow general guidelines in Chapter 2.
Usage tips
Follow general usage tips in the beginning of this chapter.