Xerox Office Finisher LX User Manual - Loading Booklet Maker

Loading Booklet Maker Staples

1-8

Office Finisher LX - User Guide

Loading Booklet Maker 

Staples

If the optional Booklet Maker is installed, a 

message appears on the touch screen when the 

unit runs out of staples. When the message is 

displayed, load a new staple cartridge into the 

Booklet Maker. The Booklet Maker contains two 

staple cartridges.

Make sure that the machine has stopped, and 

open the side cover of the finisher.

Hold the tabs on both sides of the booklet staple 

cartridge and pull the cartridge out of the Booklet 

Maker.

Hold the tabs on both sides of the new booklet 

staple cartridge, and insert it into the original 

position until it clicks.

NOTE: If you have trouble inserting the cartridge, 

make sure that the staples in the cartridge are 

properly in place.

Move the Booklet Maker Staple Cartridges so that 

both Staple Cartridges are easily accessible.