Xerox Office Finisher LX User Manual - page 13

Office Finisher LX - User Guide

1-11

Clearing Staple Jams

Remove the entire sheet of staples, including the 

jammed staple.

Pull down the front lever on the staple cartridge 

until it clicks into place.

Hold the staple cartridge by the orange lever, and 

return the cartridge to its original position.

Close the front cover of the Office Finisher LX.

NOTE: Remove the entire staple sheet. Do not 

remove the jammed staple only.

If the staples cannot be removed after carrying out 

the above procedures, contact the Xerox 

Welcome Center.

Pull up the front lever on the staple cartridge.