Xerox Phaser 3121 Manual - Using The Manual Feeder

U

SING

 P

RINT

 M

ATERIALS

3.8

Using the Manual Feeder

If you select Manual Feed in the Source option, you can 

manually load paper in the manual feeder. Manually loading 

paper can be helpful when you want to check the print quality 

after each page is printed. 

If you experience a paper jam from the tray, load one sheet of 

paper at a time into the manual feeder. 

1

Load the print material in the manual feeder with the print 

side up. 

Adjust the paper guide against the print material without 

bending the paper.

2

When you print a document, you must select Manual Feed 

for Source from the software application, and then select 

the correct paper size and type. For details, see page 4.6. 

3

Press the 

 button on the printer to start feeding.

4

Printing is started. 

5

If you are printing multiple pages, load the next sheet after 

the first page prints out, and press the 

 button. 

Repeat this step for every page to be printed.