Xerox Phaser 3121 Manual - Printing On Preprinted Paper

U

SING

 P

RINT

 M

ATERIALS

3.16

3

When you print on card stocks or the custom-sized paper, 

you must select Manual Feed for Source from the 

software application, and then select the correct paper size 

and type. For details, see page 4.6.

Note: If the size of your print material is not listed in the Size box 

in the Paper tab of the printer driver properties, click Add 

Custom button and set the size manually. See page 4.6. 

4

Press the 

 button to start feeding. 

Printing is started. Close the rear output tray after the 

printing is completed.

Printing on Preprinted Paper

Preprinted paper is paper that has some type of printing placed 

on it before it is sent through the printer (paper that has a 

preprinted logo at the top of the page, for example).

Note:

 Please avoice using carbon paper because it may cause the 

printer a mechanical trouble.

Guidelines

• Letterheads must be printed with heat-resistant ink that will 

not melt, vaporize, or release hazardous emissions when 

subjected to the printer’s fusing temperature of 400 °F 

(205 °C) for 0.1 second.

• Ink on letterheads must be non-flammable and should not 

adversely affect any printer rollers.

• Forms and letterheads should be sealed in a moisture-proof 

wrapping to prevent changes during storage.

• Before you load preprinted paper as forms and letterheads, 

verify that the ink on the paper is dry. During the fusing 

process, wet ink can come off preprinted paper.