1. DL manuals
  2. Xerox
  3. All in One Printer
  4. Phaser 8510MFP
  5. Advanced Features Manual

Xerox Phaser 8510MFP Advanced Features Manual

Other manuals for Phaser 8510MFP: Supplementary Manual, User Manual
Manual is about: Xerox Phaser 8560MFP: User Guide

Summary of Phaser 8510MFP

  • Page 1

    Avancerade funktionsguiden handleiding voor geavanceerde functies guia de recursos avançados guía de características avanzadas handbuch zu erweiterten funktionen guida alle funzioni avanzate guide des fonctions avancées advanced features guide www.Xerox.Com/office/support phaser ® 8510/8560mfp multi...

  • Page 2

    Copyright © 2006 xerox corporation. All rights reserved. Unpublished rights reserved under the copyright laws of the united states. Contents of this publication may not be reproduced in any form without permission of xerox corporation. Copyright protection claimed includes all forms of matters of co...

  • Page 3

    Phaser® 8510/8560mfp multifunction product i contents 1 using system driver options system driver features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 selecting which paper to use . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    Contents phaser® 8510/8560mfp multifunction product ii 2 using fonts types of fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 printing font samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 5

    Contents phaser® 8510/8560mfp multifunction product iii 4 managing your system system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 system control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 6: Using System Driver

    Phaser® 8510/8560mfp multifunction product 1-1 this chapter includes: ■ system driver features on page 1-2 ■ selecting which paper to use on page 1-4 ■ printing multiple pages to a single sheet (n-up) on page 1-5 ■ printing booklets on page 1-6 ■ printing separation pages on page 1-14 ■ printing cov...

  • Page 7: System Driver Features

    System driver features phaser® 8510/8560mfp multifunction product 1-2 system driver features the following table displays many of the xerox system driver features that are available with specific operating systems. This section includes more information about these features and information about how...

  • Page 8

    System driver features phaser® 8510/8560mfp multifunction product 1-3 job completion notification (page 1-23) ❍ ❍ ❍ ❍ secure print (page 1-24) ● ● ● ● ● proof print (page 1-24) ● ● ● ● ● personal print (page 1-24) ● ● ● ● saved print (page 1-24) ● ● ● ● ● personal saved prints (page 1-24) ● ● ● ● pr...

  • Page 9: Selecting Which Paper to Use

    Selecting which paper to use phaser® 8510/8560mfp multifunction product 1-4 selecting which paper to use when you send your print job to the system, you can choose to let the system automatically select which paper to use based on your document size and the paper type you select, or you can force th...

  • Page 10

    Printing multiple pages to a single sheet (n-up) phaser® 8510/8560mfp multifunction product 1-5 printing multiple pages to a single sheet (n-up) when printing a multiple-page document, you can print more than one page on a single sheet of paper. Print one, two, four, six, nine, or 16 pages per side....

  • Page 11: Printing Booklets

    Printing booklets phaser® 8510/8560mfp multifunction product 1-6 printing booklets with 2-sided printing, you can print a document in the form of a small book. Create booklets for any paper size that is supported for 2-sided (duplex) printing. The driver automatically reduces each page image and pri...

  • Page 12

    Printing booklets phaser® 8510/8560mfp multifunction product 1-7 to select booklet printing in a supported driver: operating system steps windows 98 se postscript driver 1. Select the setup tab. 2. Click the more layout options button. 3. Select print booklet style . 4. If desired, specify the creep...

  • Page 13: Using Color Corrections

    Using color corrections phaser® 8510/8560mfp multifunction product 1-8 using color corrections this section includes: ■ more options for color corrections on page 1-9 ■ automatic color corrections on page 1-11 the color correction options provide simulations of different color devices. Automatic is ...

  • Page 14

    Using color corrections phaser® 8510/8560mfp multifunction product 1-9 to select the color correction in a supported driver: more options for color corrections if you need to make additional color adjustments to the color correction you have selected for your job, you can adjust the following slider...

  • Page 15

    Using color corrections phaser® 8510/8560mfp multifunction product 1-10 to adjust only the current color correction settings for your job through a supported driver: operating system steps windows 2000, windows xp, or windows server 2003 1. Select the tekcolor tab. 2. Select the desired color correc...

  • Page 16: Automatic Color Corrections

    Using color corrections phaser® 8510/8560mfp multifunction product 1-11 automatic color corrections the automatic color correction selection applies the best color correction to each element (text, graphics, and images) in your job. You can also select the color table the system uses for these eleme...

  • Page 17

    Using color corrections phaser® 8510/8560mfp multifunction product 1-12 to adjust the automatic color correction in a supported driver: operating system steps windows 2000, windows xp, or windows server 2003 1. Select the tekcolor tab. 2. Select the automatic color correction. 3. Click the advanced ...

  • Page 18: Printing In Black and White

    Printing in black and white phaser® 8510/8560mfp multifunction product 1-13 printing in black and white if you want your output in black, white, and shades of gray, you can select black & white in a supported printer driver: selecting black and white for pcl drivers the pcl driver does not contain t...

  • Page 19: Printing Separation Pages

    Printing separation pages phaser® 8510/8560mfp multifunction product 1-14 printing separation pages a separation page (a divider page or slipsheet) can be inserted after a print job, between copies of a print job, or between individual pages of a print job. Specify the tray to use as the source for ...

  • Page 20: Printing Cover Pages

    Printing cover pages phaser® 8510/8560mfp multifunction product 1-15 printing cover pages a cover page is the first or last page of a document. The system enables you to choose a different paper source for the cover page than for the body of a document. For instance, use your company letterhead for ...

  • Page 21

    Printing cover pages phaser® 8510/8560mfp multifunction product 1-16 for the back of your front cover to remain blank when 2-sided printing, page two of your document must be blank. For the back cover of your document to remain blank, see the following table for inserting blank pages. To select cove...

  • Page 22: Scaling

    Scaling phaser® 8510/8560mfp multifunction product 1-17 scaling you can reduce or enlarge your page images when they are printed by selecting a scaling value between 25 and 400 percent. The default is 100 percent. To select scaling in a supported driver: operating system steps windows 98 se postscri...

  • Page 23: Printing Watermarks

    Printing watermarks phaser® 8510/8560mfp multifunction product 1-18 printing watermarks a watermark is additional text that can be printed across one or more pages. For example, terms like draft and confidential, which you might stamp on a page before distribution, can be inserted with a watermark. ...

  • Page 24

    Printing watermarks phaser® 8510/8560mfp multifunction product 1-19 to select, create, and edit watermarks using a supported windows driver: operating system steps windows 98 se postscript driver 1. Select the setup tab. 2. Click the more layout options button. 3. Click the watermark button to displ...

  • Page 25

    Printing negative and mirror images phaser® 8510/8560mfp multifunction product 1-20 printing negative and mirror images you can print pages as a negative image (reverses the light and dark areas in your printed image) or mirror image (flips images horizontally on pages when printed). Note: negative ...

  • Page 26: Image Smoothing

    Image smoothing phaser® 8510/8560mfp multifunction product 1-21 image smoothing image smoothing blends adjacent colors in low-resolution images for smoother color transitions. For example, use image smoothing to improve the appearance of a 72 dpi image downloaded from the web. Image smoothing is not...

  • Page 27

    Creating and saving custom sizes phaser® 8510/8560mfp multifunction product 1-22 creating and saving custom sizes phaser 8510/8560mfp products can print on custom size paper from tray 1.You can save custom size paper settings in a supported printer driver. Since these custom sizes are saved in your ...

  • Page 28: Job Completion Notification

    Job completion notification phaser® 8510/8560mfp multifunction product 1-23 job completion notification select the notify me when my job completes option if you want to be notified when your job is finished printing. A message appears in the lower-right corner of your computer screen displaying the ...

  • Page 29: Printing Special Job Types

    Printing special job types phaser® 8510/8560mfp multifunction product 1-24 printing special job types this section includes: ■ sending personal, personal saved, secure, proof, or saved print jobs on page 1-25 ■ sending print with jobs on page 1-26 ■ printing or deleting secure print jobs on page 1-2...

  • Page 30: Print Jobs

    Printing special job types phaser® 8510/8560mfp multifunction product 1-25 sending personal, personal saved, secure, proof, or saved print jobs use a supported driver to specify a job as a personal, personal saved, secure, proof, or saved print job. Note: personal and personal saved print jobs are n...

  • Page 31: Sending Print With Jobs

    Printing special job types phaser® 8510/8560mfp multifunction product 1-26 sending print with jobs to select jobs to send with your current job in a supported driver: note: print with jobs are not available for appletalk or usb connected systems. Operating system steps windows 98 se, windows 2000, w...

  • Page 32

    Printing special job types phaser® 8510/8560mfp multifunction product 1-27 printing or deleting secure print jobs to print or delete a secure print job, specify the four-digit password on the control panel: 1. Press the print button. 2. Select secure print jobs , and then press the ok button. 3. Scr...

  • Page 33

    Printing special job types phaser® 8510/8560mfp multifunction product 1-28 printing or deleting personal saved jobs to print or delete a personal saved print job, select the job name on the control panel: 1. Press the print button. 2. Select personal saved print jobs , and then press the ok button. ...

  • Page 34: Using Fonts

    Phaser® 8510/8560mfp multifunction product 2-1 this chapter includes: ■ types of fonts on page 2-2 ■ viewing a list of resident fonts on page 2-2 ■ printing font samples on page 2-3 ■ downloading fonts using the centreware font management utility on page 2-4 using fonts.

  • Page 35: Types of Fonts

    Types of fonts phaser® 8510/8560mfp multifunction product 2-2 types of fonts your system uses the following types of fonts: ■ resident fonts ■ fonts downloaded into printer memory ■ fonts downloaded with your print job from the application adobe type manager (atm) software enables your computer to d...

  • Page 36: Printing Font Samples

    Printing font samples phaser® 8510/8560mfp multifunction product 2-3 printing font samples this section includes: ■ using the control panel on page 2-3 ■ using centreware is on page 2-3 use one of the following options to print a list of available postscript or pcl fonts: ■ the system’s control pane...

  • Page 37: Management Utility

    Downloading fonts using the centreware font management utility phaser® 8510/8560mfp multifunction product 2-4 downloading fonts using the centreware font management utility to supplement the resident fonts (which are always available for printing), you can download fonts from your computer to the sy...

  • Page 38: Networking

    Phaser® 8510/8560mfp multifunction product 3-1 this chapter includes: ■ system management software on page 3-2 ■ windows 2000, windows xp, and windows server 2003 on page 3-4 ■ windows 98 se on page 3-11 ■ macintosh on page 3-16 ■ novell on page 3-22 ■ unix (linux) on page 3-23 this chapter provides...

  • Page 39: System Management Software

    System management software phaser® 8510/8560mfp multifunction product 3-2 system management software this section includes: ■ centreware internet services (is) on page 3-2 ■ centreware web on page 3-3 centreware internet services (is) centreware is provides a simple interface that enables you to man...

  • Page 40: Centreware Web

    System management software phaser® 8510/8560mfp multifunction product 3-3 centreware web centreware web is a multi-vendor system management, installation, and troubleshooting application. Use centreware web to remotely manage, install, and troubleshoot systems on your network using a web browser. Sy...

  • Page 41: 2003

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-4 windows 2000, windows xp, and windows server 2003 this section includes: ■ preliminary steps on page 3-4 ■ quick cd-rom install steps on page 3-4 ■ other methods of installation on page 3-5 ■ windows 200...

  • Page 42

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-5 5. Click i agree to accept the xerox software license agreement. 6. In the select printer dialog box, the default use walk-up technology (recommended for network systems) is selected. Click next . 7. Fol...

  • Page 43

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-6 adding the system to add the system: 1. On the desktop click start , and then click settings . 2. Select one of these options: ■ windows 2000 : click printers , double-click add printer to launch the add...

  • Page 44

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-7 printing a test page you are prompted to print a test page. 1. Select one of these options: ■ click yes to print a test page, and then click next . ■ click no if you do not want to print a test page, and...

  • Page 45

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-8 configuring the system to configure the system: 1. Insert the software and documentation cd-rom into the computer’s cd-rom drive and click have disk . 2. Click the browse button, and then select the dire...

  • Page 46: Troubleshooting

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-9 windows 2000, windows xp, and windows server 2003 troubleshooting note: for windows xp, select classic look or the windows xp procedures will not match the steps below. To select classic look, click star...

  • Page 47

    Windows 2000, windows xp, and windows server 2003 phaser® 8510/8560mfp multifunction product 3-10 printing a test page to print a test page: 1. Select the general tab. 2. Click print test page . If the system does not print, select phasersmart technical support on the troubleshooting tab of your win...

  • Page 48: Windows 98 Se

    Windows 98 se phaser® 8510/8560mfp multifunction product 3-11 windows 98 se this section includes: ■ preliminary steps on page 3-11 ■ quick cd-rom install steps on page 3-12 ■ other methods of installation on page 3-13 ■ windows 98 se troubleshooting on page 3-15 preliminary steps follow these preli...

  • Page 49: Quick Cd-Rom Install Steps

    Windows 98 se phaser® 8510/8560mfp multifunction product 3-12 quick cd-rom install steps to use quick cd-rom installation: 1. Insert the software and documentation cd-rom into the computer’s cd-rom drive. If the installer does not launch, do the following: a. Click start , and then click run . B. In...

  • Page 50

    Windows 98 se phaser® 8510/8560mfp multifunction product 3-13 other methods of installation install your system on a windows 98 se network using phaserport software. Phaserport software the windows installer installs phaserport for windows (for those installations using postscript drivers). Phaserpo...

  • Page 51

    Windows 98 se phaser® 8510/8560mfp multifunction product 3-14 changing a phaserport ip address if the system’s ip address is changed, you must change the ip address for the device’s corresponding port: 1. Click start , click settings , and then click printers . 2. Right-click the system to be change...

  • Page 52

    Windows 98 se phaser® 8510/8560mfp multifunction product 3-15 windows 98 se troubleshooting this troubleshooting section assumes you have completed the following tasks: ■ verified that the system is plugged in, turned on, and connected to an active network. ■ installed a postscript print driver. ■ v...

  • Page 53: Macintosh

    Macintosh phaser® 8510/8560mfp multifunction product 3-16 macintosh this section includes: ■ requirements on page 3-16 ■ quick cd-rom install steps on page 3-16 ■ enabling and using ethertalk for mac os 9.X on page 3-16 ■ enabling and using tcp/ip for mac os 9.X on page 3-17 ■ enabling or using tcp/...

  • Page 54

    Macintosh phaser® 8510/8560mfp multifunction product 3-17 enabling and using tcp/ip for mac os 9.X this section provides installation and troubleshooting steps for macintosh os 9.X. Setting up the macintosh ethernet port for tcp/ip to set up your macintosh for tcp/ip: 1. On the control panel, select...

  • Page 55: 10.2 and Higher

    Macintosh phaser® 8510/8560mfp multifunction product 3-18 enabling or using tcp/ip or appletalk for mac os x, version 10.2 and higher verify that you are running mac os x, version 10.2 or higher. The previous versions of mac os x do not fully support postscript printing and printer features. Setting...

  • Page 56

    Macintosh phaser® 8510/8560mfp multifunction product 3-19 creating an appletalk system with mac os x, version 10.2 and higher to create an appletalk printer: 1. Verify that appletalk is enabled in system preferences . 2. Open the print center utility. In mac os x, version 10.3 or higher, open the pr...

  • Page 57: 10.2 and Higher)

    Macintosh phaser® 8510/8560mfp multifunction product 3-20 macintosh troubleshooting (mac os 9.X, mac os x, version 10.2 and higher) the following procedure eliminates cabling, communication, and connection problems. Once you complete these steps, print a test page from your software application. Not...

  • Page 58

    Macintosh phaser® 8510/8560mfp multifunction product 3-21 mac os x, version 10.2 and higher troubleshooting perform these steps only for mac os x, versions 10.2 and higher: 1. Open the network utility , and then click the ping tab. 2. Enter the system’s ip address. 3. Click ping . If you do not get ...

  • Page 59: Novell

    Novell phaser® 8510/8560mfp multifunction product 3-22 novell this section includes: ■ novell distributed print services (ndps) on page 3-22 ■ xerox ndps gateway software on page 3-22 novell distributed print services (ndps) novell distributed print services (ndps) are products built on novell’s pri...

  • Page 60: Unix (Linux)

    Unix (linux) phaser® 8510/8560mfp multifunction product 3-23 unix (linux) this section includes: ■ quick install steps on page 3-24 your system supports connection to a variety of unix platforms through the parallel and network interface. The workstations currently supported by centreware for unix/l...

  • Page 61: Quick Install Steps

    Unix (linux) phaser® 8510/8560mfp multifunction product 3-24 quick install steps perform the following procedures to set up the system and install the appropriate drivers. From the system to set up the system: 1. Verify that both tcp/ip protocol and the proper connector are enabled. 2. On the contro...

  • Page 62: Managing Your

    Phaser® 8510/8560mfp multifunction product 4-1 . This chapter includes: ■ system settings on page 4-2 ■ system security on page 4-14 ■ analyzing system usage on page 4-16 managing your system.

  • Page 63: System Settings

    System settings phaser® 8510/8560mfp multifunction product 4-2 system settings this section includes: ■ system control settings on page 4-2 ■ paper handling settings on page 4-9 system control settings this section includes: ■ setting the control panel language on page 4-2 ■ setting control panel ac...

  • Page 64

    System settings phaser® 8510/8560mfp multifunction product 4-3 using centreware is to change the default control panel language using centreware is: 1. Launch your web browser. 2. Enter your system’s ip address in the browser’s address field (http://xxx.Xxx.Xxx.Xxx). 3. Click properties . 4. Select ...

  • Page 65

    System settings phaser® 8510/8560mfp multifunction product 4-4 setting the system date and time some system features, like scheduled warmup mode and job accounting, rely on the system date and time settings to initiate functions and report usage information. To change the system date and time, use o...

  • Page 66

    System settings phaser® 8510/8560mfp multifunction product 4-5 controlling startup page printing the system can produce a startup page each time the system is turned on or reset. The factory default is on . You can print the startup page at any time from the information pages menu. To turn on/off au...

  • Page 67

    System settings phaser® 8510/8560mfp multifunction product 4-6 changing the power saver timeout to save energy, the system enters a power saver, low-energy consumption mode after a pre- defined period of time since its last activity. In this mode, most electrical systems are shut down. When a job is...

  • Page 68

    System settings phaser® 8510/8560mfp multifunction product 4-7 changing intelligent ready mode intelligent ready mode is an automated system that: ■ monitors the system’s usage. ■ warms up the system when you are most likely to need it based on past usage patterns. ■ activates the power saver mode w...

  • Page 69

    System settings phaser® 8510/8560mfp multifunction product 4-8 viewing supply usage information the system detects the status of certain supplies and consumables, such as ink, maintenance kit, and the number of pages printed. To view the status of supplies, use one of the following options: ■ the sy...

  • Page 70: Paper Handling Settings

    System settings phaser® 8510/8560mfp multifunction product 4-9 paper handling settings this section includes: ■ selecting tray 1 mode on page 4-9 ■ setting the duration for the tray 1 prompt on page 4-11 ■ setting the duration for the tray 2–n prompt on page 4-12 ■ changing the load paper timeout on...

  • Page 71

    System settings phaser® 8510/8560mfp multifunction product 4-10 using the control panel to select a tray 1 mode setting on the control panel: 1. Press the system button. 2. Select general setup , and then press the ok button. 3. Select paper handling setup , and then press the ok button. 4. Select t...

  • Page 72

    System settings phaser® 8510/8560mfp multifunction product 4-11 setting the duration for the tray 1 prompt the tray 1 prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in the tray. The tray 1 prompt requests that the user confirm the current t...

  • Page 73

    System settings phaser® 8510/8560mfp multifunction product 4-12 setting the duration for the tray 2–n prompt the tray 2–n prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in trays 2–n. The tray 2–n prompt requests the user to confirm the curr...

  • Page 74

    System settings phaser® 8510/8560mfp multifunction product 4-13 changing the load paper timeout when your print job is formatted for a type or size of paper that is not loaded in the system, the system’s control panel displays a message requesting you to load the appropriate paper. The load paper ti...

  • Page 75: System Security

    System security phaser® 8510/8560mfp multifunction product 4-14 system security this section includes: ■ selecting administrative settings on page 4-14 ■ selecting printing security settings on page 4-15 ■ selecting the secure socket layer (ssl) settings on page 4-15 ■ locking the control panel menu...

  • Page 76

    System security phaser® 8510/8560mfp multifunction product 4-15 selecting printing security settings printing security settings enable you to: ■ remove unprinted secure, personal, and proof jobs. ■ overwrite hard drive security options. ■ select jam recovery options. To set printing security setting...

  • Page 77: Analyzing System Usage

    Analyzing system usage phaser® 8510/8560mfp multifunction product 4-16 analyzing system usage this section includes: ■ job accounting on page 4-16 ■ usage profile reports on page 4-17 ■ mailinx alerts on page 4-18 ■ xerox usage analysis tool on page 4-19 note: for information about managing transmis...

  • Page 78: Usage Profile Reports

    Analyzing system usage phaser® 8510/8560mfp multifunction product 4-17 usage profile reports the system generates reports accessible through centreware is that detail device usage. Usage profile reports track multiple items, including: ■ system information, such as system name, date installed, total...

  • Page 79: Mailinx Alerts

    Analyzing system usage phaser® 8510/8560mfp multifunction product 4-18 mailinx alerts mailinx alerts enable the system to automatically send email to the system administrator and others under the following conditions: ■ when system errors, warnings, and alerts occur. ■ when the system requires atten...

  • Page 80: Xerox Usage Analysis Tool

    Analyzing system usage phaser® 8510/8560mfp multifunction product 4-19 xerox usage analysis tool the xerox usage analysis tool is a windows client/server application that enables system administrators to automatically track xerox system usage and obtain job accounting records. The tool supports larg...

  • Page 81: Printer Specifications

    Phaser® 8510/8560mfp multifunction product a-1 physical specifications base unit ■ width: 532 mm (20.9 in.) ■ depth: 665 mm (26.2 in.) ■ height: 620 mm (24.4 in.) ■ weight: 43 kg (93 lb.) optional 525-sheet feeder height: 135 mm (5.3 in.) optional cart ■ width: 500 mm (19.7 in.) ■ depth: 670 mm (27 ...

  • Page 82

    Phaser® 8510/8560mfp multifunction product a-2 performance specifications resolution maximum resolution: 600 x 600 dpi print speed ■ phaser 8510mfp multifunction product: up to 24 pages per minute ■ phaser 8560mfp multifunction product: up to 30 pages per minute ■ up to 30 pages per minute (ppm) fro...

  • Page 83: Regulatory

    Phaser® 8510/8560mfp multifunction product b-1 xerox has tested this product to electromagnetic emission and immunity standards. These standards are designed to mitigate interference caused or received by this product in a typical office environment. United states (fcc regulations) this equipment ha...

  • Page 84

    Phaser® 8510/8560mfp multifunction product b-2 european union warning: this is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Low voltage directive 73/23/eec as amended electromagnetic compatibi...

  • Page 85: Material Safety Data

    Phaser® 8510/8560mfp multifunction product c-1 for material safety data information regarding your phaser 8510/8560mfp product, go to: ■ united states and canada: www.Xerox.Com/msds ■ european union: www.Xerox.Com/environment_europe for the customer support center phone numbers, go to www.Xerox.Com/...

  • Page 86: Product Recycling

    Phaser® 8510/8560mfp multifunction product d-1 all countries if you are managing the disposal of your xerox product, please note that the product may contain lead, mercury, and other materials whose disposal may be regulated due to environmental considerations in certain countries or states. The pre...

  • Page 87

    Phaser® 8510/8560mfp multifunction product d-2 professional/business environment in accordance with european legislation, end of life electrical and electronic equipment subject to disposal must be managed within agreed procedures. Prior to disposal, please contact your local dealer or xerox represe...

  • Page 88: Acknowledgements

    Phaser® 8510/8560mfp multifunction product e-1 original ssleay license copyright © 1995-1998 eric young (eay@cryptsoft.Com). All rights reserved. This package is an ssl implementation written by eric young (eay@cryptsoft.Com). The implementation was written so as to conform with netscape’s ssl. This...

  • Page 89

    Phaser® 8510/8560mfp multifunction product e-2 this software is provided by eric young “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author or contribu...

  • Page 90

    Phaser® 8510/8560mfp multifunction product e-3 part 2: networks associates technology, inc. Copyright notice (bsd) ----- copyright © 2001-2003, networks associates technology, inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted pro...

  • Page 91

    Phaser® 8510/8560mfp multifunction product e-4 part 3: cambridge broadband ltd. Copyright notice (bsd) ----- copyright © 2001-2003, cambridge broadband ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following...

  • Page 92

    Phaser® 8510/8560mfp multifunction product e-5 merchantability and fitness for a particular purpose are disclaimed. In no event shall the copyright holders or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, pro...

  • Page 93

    Phaser® 8510/8560mfp multifunction product index-1 index numerics 2-sided printing booklets, 1-6 a accessing online manuals using centreware is, 3-2 accounting records, 4-16 adding a printer port windows 98 se, 3-13 adding the printer windows 2000, windows xp, windows server 2003, 3-6 administrative...

  • Page 94

    Index phaser® 8510/8560mfp multifunction product index-2 color adjustments, 1-9 automatic color correction more options, 1-11 blending adjacent colors in low resolution images, 1-21 color correction, 1-8 more options, 1-9 tekcolor correction, 1-8 configuring the printer windows 2000, windows xp, win...

  • Page 95

    Index phaser® 8510/8560mfp multifunction product index-3 ethernet port setting up for appletalk, 3-18 setting up for tcp/ip, 3-18 macintosh, 3-17 ethertalk enabling and using mac os 9.X, 3-16 f fax function selecting control panel settings, 4-2 selecting paper handling options, 4-9 first or last pag...

  • Page 96

    Index phaser® 8510/8560mfp multifunction product index-4 enabling and using ethertalk mac os 9.X, 3-16 enabling and using tcp/ip mac os 9.X, 3-17 enabling and using tcp/ip or appletalk mac os x, version 10.2 and higher, 3-18 quick cd-rom installation, 3-16 requirements, 3-16 setting up the ethernet ...

  • Page 97

    Index phaser® 8510/8560mfp multifunction product index-5 power saver changing the timeout setting using centreware is, 4-6 changing the timeout setting using the control panel, 4-6 preliminary steps windows 98 se, 3-11 windows 2000, windows xp, windows server 2003, 3-4 print job information, 4-16 pr...

  • Page 98

    Index phaser® 8510/8560mfp multifunction product index-6 job timing, 4-17 mirror images, 1-20 multiple pages per sheet, 1-5 negative images, 1-20 n-up, 1-5 personal jobs, 1-27 personal saved jobs, 1-28 proof print jobs, 1-27 saved print jobs, 1-27 secure print jobs, 1-27 selecting cover page printin...

  • Page 99

    Index phaser® 8510/8560mfp multifunction product index-7 sending personal print jobs, 1-25 personal saved jobs, 1-25 print with jobs, 1-26 proof jobs, 1-25 saved print jobs, 1-25 secure jobs, 1-25 separation pages, 1-2 printing, 1-14 setting administrative security levels, 4-14 control panel languag...

  • Page 100

    Index phaser® 8510/8560mfp multifunction product index-8 troubleshooting mac os 9.X, 3-20 mac os x, version 10.2 and higher, 3-21 macintosh networking, 3-20 mac os x, versions 10.2 and higher, 3-21 mac os 9.X, 3-20 print-quality problems using centreware is, 3-2 using centreware web, 3-3 windows 200...