Xerox VersaLink C505 User manual - page 155
Cleaning the Feed Rollers on the Duplex Automatic Document Feeder
1. Open the Top Cover.
2. Wipe the feed rollers with a dry, soft, lint-free cloth or paper towel until the rollers
are clean.
Note
If the feed rollers get stained with toner or debris, they can cause stains on the
documents. To remove the stains, use a soft lint-free cloth dampened with a neutral
detergent or water.
3. Close the Top Cover.
Cleaning the Interior
Warning
• Never touch a labeled area on or near the heat roller in the fuser. You can get burned.
If a sheet of paper is wrapped around the heat roller, do not try to remove it
immediately. Power off the printer immediately and wait 40 minutes for the fuser
to cool. Try to remove the jam after the printer has cooled.
• If you spill any toner in the printer, wipe it up using a moist cloth. Never use a vacuum
cleaner to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or
explosion.
To prevent stains inside the printer that can deteriorate print quality, clean the interior
of the printer regularly. Clean the printer interior whenever you replace the drum cartridge.
7-5
Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
Maintenance