Xerox Versant 80 Press Customer Expectation & Installation Manual - page 10
Detailed Specifications
Xerox
®
Versant
®
80 Press
Customer Expectation and Installation Guide
Xerox Confidential
5
Operating Environment
Operating
Environment
Xerox Versant ® 80 Press
Required Temperature
Range
50° to 90° F (10° to 32° C)
Required Relative Humidity
15% to 85% RH
Altitude (above sea level)
Max of 8,200 feet (2,500 meters)
Sound Pressure Levels
Running: 63.0 dBA
Standby: 36.1 dBA
For detailed information, refer to
Environmental Requirements for the Press
.
Electrical Requirements
Electrical
Xerox Versant ® 80 Press
Press
North America
Receptacle:
208–240 VAC, 50/60 Hz,
NEMA 6-20R
Europe
: receptacle that mates to the PCE
Shark 023-6 plug (shown below)
220 – 240 VAC, 50Hz
Additional electrical required
for print server, feeding /
finishing devices
(Note: HCF, BR Finisher and
BR Booklet Finisher plug
directly into press and
require no additional
receptacle.)
Nema 5-15R or 5-20R
For detailed information refer to
Electrical Requirements
.
Power Consumption
Xerox Versant ® 80 Press
Voltage XC-
208
– 240 V
XE – 220 – 240 V
Power Consumption
XC – 208 – 3.66 kW or less
240 – 4.224 kW or less
XE – 220 – 4.4 kW or less
240 – 4.8 kW or less
Standby Mode
1,400 watts
Warm up Time from Power
off
≤
5 minutes
Feature Specifications
Xerox Versant ® 80 Press
* Using Centerline Paper
First Print Out
Time (FPOT)
11.2 sec or less
In Ready mode, FPOT is the
time elapsed from when the
print engine receives Start
command, until the trail
edge of the first print exits
the print engine.
Resolution
2400 x 2400 x 1
dpi** (Print Engine
Addressability)
1200x1200 dpi
RIP resolution
10 bits per pixel
bit depth
**dpi = dots per inch
Halftones Screens
supported:
300 dot, 200 line, 175 dot
150 dot, 200 dot, and
stochastic
Xerox Versant ® 80 Press
* Using Centerline Paper
Line Screens
Halftone Screens
150, 175, 200, 300, 600 Clustered Dot
150, 200 Rotated Line Screen
FM Screen
Front to Back
Registration
Internal trays:
64 – 256 gsm: +/- 1.0
mm
1-Tray OHCF
64 – 300 gsm: +/-1.0
mm
Advanced HCF:
52 – 300 gsm: +/- 1.0
mm
Specification applies only to
Xerox Versant ® 80 Press
centerline paper measured
on an 11 x 17” (A3) sheet.
To achieve registration
results with paper other than
centerline paper, Xerox
recommends that you use
SIQA to create custom media
profiles. Note that custom
cut media may adversely
impact registration
performance.
Color to Color
Registration
≤
70 microns
Specification applies on either
Color Xpressions or Colotech+
90 gsm paper.
Specification may vary on
papers above 90 gsm.
Max Printable
Area
12.83 in x 18.98 in
(326 mm x 482 mm)
Guaranteed Image Quality:
12.48 in x 18.98 in (317
mm x 482 mm)
Print Features
See Print Server section.
Print Solutions
See Print Server section.
Optional
See Print Server section.
Device Management
Features
Xerox Versant ® 80 Press
Workflow
Variable
Information
Solutions
XMPie®
Xerox® FreeFlow® Variable Information Suite
Other industry partners
Automation
Xerox® FreeFlow® Core
Xerox® IntegratedPLUS Finishing Solution for
Booklets
Xerox® IntegratedPLUS automated Color
Management
Remote Services
Xerox
®
Connect
Advantage
Services
Sophisticated diagnostic technology
Analysis of real-time device performance data,
allowing for reactive and proactive problem
resolution
Dedicated, highly skilled specialists
Parts prediction
Fault code interpretation and diagnosis
Extensive array of tool and information quickly
accessible via the web
Meters:
Color
Impressions
Black
Impressions
Total
Impressions
Color Large
Impressions
Black Large
Impressions
Large Size Definition:
For the Versant ® 80
Press, a large sheet is defined as having greater than
or equal to 145 square inches in total area. For
example:
8.5 x 14 in is NOT oversize (119 sq. in)
11 x 17 in is oversize (187 sq. in)
11 x 14 in is oversize (154 sq. i.n)
8.5 x 17 in is NOT oversize (144.5 sq. in)
A3 is oversize (124740 sq. mm)
A4 is NOT oversize (62370 sq. mm)
B4 is NOT oversize (88250 sq. mm)