Xerox Versant 80 Press Customer Expectation & Installation Manual - page 7
Product Overview
Xerox
®
Versant
®
80 Press
Customer Expectation and Installation Guide
Xerox Confidential
2
Finishing Options
IMPORTANT:
Refer to Configuration Dependencies for information on
configuration requirements for the finishing devices.
High Capacity
Stacker (HCS)
The HCS is designed for long production runs:
Top tray has a maximum 500 sheet capacity.
Stacking a maximum of 5,000 sheets (based on
80 gsm centerline paper) and offsetting the
output in the stack tray/cart
The movable stack tray/cart provides easy
transition of the output to off-line finishing
An additional stack tray/cart is available for the
customer to order
Sample prints are additional prints that are
directed to the top tray for inspection. Sample
prints are not produced by redirecting sheets
from the stack tray/cart to the top tray;
therefore the contents in the stack tray/cart are
complete
Standard Finisher
The Standard Finisher features include a basic in-
line punch, stapler, the stacker tray, and top exit
tray. It also includes a built-in interposer (inserter)
and a built-in decurler unit that corrects the curl
on paper output from the print engine.
An optional C/Z Folder is available which includes
the C-Fold, Z-Fold, and Z-Fold Half Sheet. Refer to
C/Z Folder for more information.
Booklet Maker
Finisher
The Booklet Maker Finisher features include a
basic in-line punch, stapler, the stacker tray, top
exit tray, and a booklet unit capable of saddle
stapling and bi-fold. It also includes a built-in
decurler unit that corrects the curl on paper
output from the print engine and a built-in
interposer (inserter) that feeds cover paper to the
finisher for saddle-staple operation.
An optional C/Z Folder is available which includes
the C-Fold, Z-Fold, and Z-Fold Half Sheet. Refer to
C/Z Folder for more information.
Standard Finisher
Plus
The Standard Finisher Plus includes the
functionality of the Standard Finisher and adds
interface/trans- port module to enable connection
to third party finishing solutions.
An optional C/Z Folder is available which includes
the C-Fold, Z-Fold, and Z-Fold Half Sheet. Refer to
C/Z Folder for more information.
C/Z Folder
This optional unit can perform C-Fold, Z-fold, and
Z- Fold Half-Sheet (also called Engineering Z-
Fold). The C/Z Folder can be added to these
finishing devices:
Standard Finisher
Booklet Maker Finisher
Standard Finisher Plus
SquareFold
®
Trimmer Module
This optional device is available only with the
Booklet Maker Finisher (with or without the C/Z
Folder). The SquareFold Trimmer Module flattens
the spine of the booklet and trims the face of the
booklet.
2-Knife Timmer
This optional device is available only with the
SquareFold Trimmer module. Provides full-bleed
trim up to 3/16” (5mm) thickness, adjustable trim
dimensions, no DFA required.
Other Options
Foreign Interface
Kit
The Foreign Interface Kit enables the connection
of external devices such as auditrons or
coin-op devices. This will perform in copy and print
modes.
Convenience
Stapler
Staple up to 50 sheets of 90 gsm/24 lb media.
Common Access
Card Enablement
Kit
Security feature to identify user based on two-
factor identification requirement – access card
plus user PIN.
Network
Accounting Kit
Enables reporting and user/device management in
combination with optional accounting solutions.
USB Enablement
Kit
Enables scan-to-USB functionality.
Configuration Dependencies
The following dependencies are required for all or certain configurations:
Performance
Package
Not compatible with:
EFI Integrated
BR Finisher
OCT
Interface Module
The Interface Module is required with any system
configuration that has one or more finishing
devices, except the OCT or either BR Finishers.
Required on system configurations with:
HCS
Standard Finisher
Standard Finisher Plus
GBC Punch
GBC
AdvancedPunch
Requires Interface Module plus:
HCS
and / or
Standard Finisher
Standard Finisher Plus
SquareFold
Trimmer Module
This device requires the Interface Module and the
Booklet Maker Finisher. The SquareFold Trimmer
Module is not available with any other finishing
device.
Standard Finisher
Plus
This device requires the Interface Module and a
third-party finishing device.
BR Finisher
BR Booklet Finisher
Must be ordered with V-Tra module
Not compatible with any other finisher
Does not require IFM
2-Knife Trimmer
This device requires the Interface Module, the
Booklet Maker Finisher and the SquareFold
Trimmer.