Xerox WorkCentre 3215NI User Manual - page 247
Common Problems
Xerox® WorkCentre® 3215/3225
User Guide
235
Wrinkles or creases
• Ensure that the paper is loaded properly.
• Check the paper type and quality. (See
Media Guidelines
.)
• Turn the stack of paper over in the tray. Also try rotating the paper 180 degrees in
the tray.
Back of printouts
are dirty
Check for leaking toner. Clean the inside of the machine. (See
Cleaning the Machine.
)
Solid Black pages
• The toner cartridge may not be installed properly. Remove the cartridge and reinsert
it.
• The toner cartridge may be defective. Remove the toner cartridge and install a new
one.
• The machine may require repair. Contact a service representative.
Loose toner
• Clean the inside of the machine.
• Check the paper type and quality. (See
Media Guidelines.
)
• Remove the toner cartridge and install a new one. (See
Replacing the Toner
Cartridge.
)
• The machine may require repair. Contact a service representative.
Character Voids
Character voids are white areas within parts of characters that should be solid black:
• If you are using transparencies, try another type of transparency. Because of the
composition of transparencies, some character voids are normal.
• You may be printing on the wrong surface of the paper. Remove the paper and turn
it around.
• The paper may not meet paper specifications.
Condition
Suggested Solutions
A
A