Xerox WorkCentre Pro C2128 Quick Start Manual

Page of 4

Download

Bookmark us

Warning: In order to have the Three Hole printing service you

must have the Professional or Advanced Office finisher installed

on your machine. Please contact your local Xerox sales repre-

sentative for details.

Fig. 1-1

Fig. 1-2

In the Printers window, right click the

Xerox WorkCentre Pro

C3545 PS

icon.

Note: This screen may vary depending on your Operating

System.

Fig. 1-3

Click

Properties

Fig. 1-4

Click

Configuration

Fig. 1-6

Click the down arrow

Finisher/Output Tray

and select

Professional Finisher

from the drop down menu. Click the

down arrow and select

3 Hole Punch Unit

from the drop down

menu. Click

Fig. 1-5

Click

Installable Options

Three Hole Printing - 1 of 4

Page 1
Warning: in order to have the three hole printing service you must have the professional or advanced office finisher installed on your machine. Please contact your local xerox sales repre- sentative for details. Fig. 1-1 fig. 1-2 in the printers window, right click the xerox workcentre pro c3545 ps ...
Page 2
Fig. 1-7 click ok . Fig. 1-8 close the window. Click the “x” in the upper right corner to close the window. Three hole printing - 2 of 4 quick start guide workcentre pro c2128/c2636/c3545 three hole printing part 1 of 2.
Page 3
Fig. 2-2 click on the file and select print from your application. Fig. 2-3 verify that the correct printer is selected and click on properties . Fig. 2-4 click on the paper/output tab. Fig. 2-6 click ok . Fig. 2-5 click on the down arrow from select finishing and select 3 hole punch . Click ok . No...
Page 4
Fig. 2-7 print out is completed. Three hole printing - 4 of 4 quick start guide workcentre pro c2128/c2636/c3545 three hole printing part 2 of 2.