Xerox Xerox DocuMate 4790 User Manual - page 35
of
211
Xerox DocuMate 4790
User’s Guide
35
2.
Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the
plug into either connection.
3.
Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and automatically
loads the appropriate software to run the scanner. If your computer is running Windows version
XP or later, you will see a message similar to the one below.