Xexun Tk 102-2 Quick Start Manual

Other manuals for Tk 102-2: User Manual, User Manual

Summary of Tk 102-2

  • Page 1

    Tk102-2 quick start guide start here.

  • Page 2

    Thanks for choose our product. This quick start guide tells you how to set up your gps tracker. Please charge 12hours at first use. Insert sim card in right way. Please put the unit outside and make sure the trademark side facing up. Unit will turn on automatically when put the bat tery in, the blue...

  • Page 3

    Now you can operate the function .Begin! How to put in sim card. Tf card*. Support 2gb tf card, over-the-air update, resume from break point cannot work without tf card. Over the air update. Update can be finished by sms ,and also the software on our website will be update occasionally. Breakpoint c...

  • Page 4

    Again when have gprs signal. Password. We suggest change the password and keep it in mind. Please contact with franchiser if you forgot it authorization. , unit only work with correct one. Sms will be send to authorized number. Authorized number can send the command without password. Traffic mode wh...

  • Page 5

    Internet monitor. 1. Set apn. Apn stands for access point name. For examplepicture 1, china mobile “cmnet”, send sms“ 123456apn cmnet ”to the unit; if apn have user name and password, for example picture 2,microcell, apn is internet, user name:fido , password:fido. 1 2.

  • Page 6

    2. Ip and port. When apn setting succeed, send sms “ 123456adminip 119.147.23.100 2337 ”,it will reply “ adminip ok! ”.“2337”is port number. 3. Data transmission. Send sms:“ 123456t010s***n ”to the unit, will reply” t010s***n ok ”. Data will be transmissionto the platform every 10 seconds..

  • Page 7

    4. Internet platform. Please contact franchiser. They will supply you platform website, user name, password and help you to add your unit into platform. You can check more information about platform in cd-rom..

  • Page 8

    Password. Send sms“ 123456password 000000 ”to unit,will reply “ password 000000 ok! ”.Notice:123456=old password,000000=new password..

  • Page 9

    One time. Using your mobile phone call the inside number of unit .It will hang up and reply to a real time positioning messages. Contents include: latitude, longitude, speed, date, battery, signal, imei number. Send sms " 123456smslinkone " to the unit, will reply location sms..

  • Page 10

    Successive positioning. Send sms “ 123456t030s002n ” to the unit, will reply “ t030s002n ok! ” it will report the real time sms at 30s interval for 2 times. Notice: s=second, minute, h=hour. The shortest interval time is 005s, the longest interval time is 255h; reply the most times is 999n, unlimite...

  • Page 11

    Authorization. Call the unit for 10 times and successful positioning. This number will be the default for authorized number. Send sms " 123456admin 159200xxxxx " to the unit,it will be authorized of this number.Only 5 numbers able to be authorization.If need cancel, send” 123456admin ”..

  • Page 12

    Monitor. Send " 123456monitor ”to the unit, will reply “ monitor ok! ”,then call the unit to enter into the monitor mode .Send “ 123456tracker ”to the unit when need to cancel , it will reply “ tracker ok! ”back into the positioning mode again..

  • Page 13

    Traffic mode. Send sms " 123456traffic 5 " to the unit, will reply " traffic 5 ok! ". 5 stands for the sensibility level, setting from 0 to 10. 0 means closing the function. When moving, the unit will send gps data to monitor platform or mobile phone automatically every 30 seconds; when stay still, ...

  • Page 14

    Sensor alarm. Send sms " 123456shake 5 " to the unit,it will reply "shake 5 ok". The unit will send alarm message to phone when shake. Send sms“ 123456shake 0 ” when needs to cancel the function.Number 5 stands for the sensibility level, setting from 0 to 10. 0 means closing the function.Notice: thi...

  • Page 15

    Overspeed alarm. Sendsms“ 123456speed 050 ”to the unit,it will reply “ speed ok! ”. When the unit moves exceeding 50 km/h, the unit will send sms alarm. When the speed is no more than 50km/h, it will send alarm as well. Send “ 123456speed 0 ”when needs to cancel. Notice: speed alarm is set at least ...

  • Page 16

    Movement alarm. When the unit stays immobile in a place for more than 3 minutes, send sms“ 123456move 200 ”to the unit, it will reply“ move 200 ok !". It will send alarm sms when moves out of 200 meters.Send sms“ 123456move 0 ”when needs to cancel..

  • Page 17

    Geo fence. Set geo fence for the unit to restrict it movement within a district. The unit will send sms to the authorized numbers when it breaches the district. If needs send sms" 123456fence 22589155n,113.827732e;22.559000n,113.897111e ”..

  • Page 18

    Total mileage calculation. If you want to calculate the mileage, according to the following steps: 1. Send sms“ 123456gprsdata 1 ”to the unit. 2. Send sms “ 123456t010s***n ”to the unit. 3. Send sms “ 123456km0 ”to the unit. 4. Send sms “ 123456km? ”,it will reply the mileage dates..

  • Page 19

    Sos. Press the sos for 3 secondwhen dangerous. It will send“ help me ” to all the authorized numbers..

  • Page 20

    Map link. There are two formats: date format, map link format. Send sms“ 123456smslink 1 ”to the unit, it will reply “ smslink 1 ok ”,then call the unit again,it will reply map link, access to this website may view location map. Send sms“ 123456smslink 0 ”to the unit will restore to date format. The...

  • Page 21

    Time. Default is beijing time, if you want to change time, send sms“ 123456time zone -6.5 ”.Notice:“+”no need to write;“-”must write; 6.5=6:30..

  • Page 22

    Udp/tcp. Default is tcp,if you want to change into udp,send sms“ 123456gprsmode 1 ” to unit,if you want change back to tcp, send sms“ 123456gprsmode 0 ”..

  • Page 23

    Overtheairupdate*. We will update software, if you need update tracker, please install memory card (tf), and send sms “ 123456ldu,server=http://www.Cnjeo.Com/down/vpj. Bin,en=72 ”. After you receive 3pcs of related message, it means updated successfully. Notice:need about 5 min to do updating..

  • Page 24

    Status. Send“ 123456status ”to unit ,it will reply sms. Include: imei、speed、battery、position state、time、ip、apn、 port etc..

  • Page 25

    Version. Send sms“ 123456version ”to unit ,it will reply version information..

  • Page 26

    Reset. Send sms“ 123456begin ”to unit, it will reply“ begin ok! ”, then unit will back to default settings..

  • Page 27

    Product parameter network: gsm/gprs gsm/gprs module: simcom sim900 band: 850/900/1800/1900mhz communication protocol: tcp/udp cpu: arm7 gps chip: sirf3 gps sensitivity: -159dbm gps accuracy: 5-20m time to first fix cold status 45s hot status 1s car charger: 12—24v input 5v output wall charger: 110-2...