1 gsm/gprs/gps tracker user manual u preface thank you for purchasing gps tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prio...
2 content 1 summary ---------------------------------------------------------------------------------- 3 2 application --------------------------------------------------------------------------------- 3 3 hardware description 3.1 front face -----------------------------------------------------------...
3 1 summary working based on existing gsm/gprs network and gps satellites, this product can locate and monitor any remote targets by sms or gprs. 2 applications z rental vehicle / fleet management etc z protect the child / the old / the disabled / pet etc z protect businessmen z personnel management...
4 3.5 interior 4 specs. Content specs. Dim. 64mm x 46mm x 17mm(1.8”*2.5”*0.65”) weight 50g network gsm/gprs band 850/900/1800/1900mhz or 900/1800/1900mhz gps chip sirf3 chip gsm/gprs module simcom300/simcom340 gps sensitivity -159dbm gps accuracy 5m time to first fix cold status 45s warm status 35s ...
5 5 usage 5.1 sim card installation make sure that there is no call transfer and call display is on, and pin code off. The sms message must in text format, can’t be identified for pdu format. Steps: 1 open the rear cover, and pick out the battery. 2 push the foil along and turn it left. 3 put the si...
6 5.3 startup z put the sim card and battery in place. Z the unit turns on automatically when the sim card and battery is inserted. Z for the first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.) z in 10 or 40 seconds, the unit will begin to ...
7 number. If the number is successfully authorized, the unit will reply “admin ok!” in sms. 5.6.2 cancel:send sms noadmin+password+space+authorized number to delete the authorized number. 5.6.3 for roaming purpose, you have to add your country code ahead of the cell phone number, for example, please...
8 5.7 real-time polling 5.7.1 if there is no authorized number, when any number dials up the unit, it will report a geo-info; if there is already an authorized number, then it will not respond when an unauthorized number calls it up. 5.7.2 when an authorized number dials up the unit, it will hang up...
9 maximum 255 in value. 5.8.2 send sms t030s***n+password to the unit, it will reply sms heaps of times 5.8.3 cancel: send notn+password to delete the “ auto track ” remark: the interval must not be less than 5s. 5.9 monitoring mode (voice surveillance) send sms monitor+password, the response from t...
10 5.11.2 cancel: send sms nostockade+password to deactivate this function. 5.11.3 response sms format: stockade!+geo-info to the authorized numbers. It will alarm one time in each setting. 5.12 movement alert this function is using for the owner to get alarm when the tracker moves out of a restrict...
11 5.14 imei checking: send sms imei+password to the unit to check the imei number of the tracker. 5.15 sos button press the sos for 3 second, it will send “ help me !+ geo-info” to all the authorized numbers every 3 minutes. It will stop sending such a sms when any authorized number reply sms ”help...
12 5.19 gsm id（this function can be add or delect for customization.） there is gsm id in each sms from the tracker. The location of the tracker can be found according to the gsm id in case of no gps signal. Gsm id is make up of mcc(mobile country code),mnc(mobile network code),lac(location area code...
13 cancel: send sms readsd+password+space+0 to ask the tracker to stop sending data in the sd card to the server. 5.22 gprs setting in order to use gprs function, the user needs to set ip, port and apn ( access point name ) by either cell phone, or our pc software. （ note: some countries or regions ...
14 is set. 5.22.5 gprs transport protocols as soon as the ip & port & apn are set up, the user can make a call or send sms to tracker. The tracker will hand up and report the coordinates to ip address. The message format sent by tracker to ip address is as following: serial number + authorized numbe...
15 2533==2533= lac location area code 720c==720b= cell id (note:gsm id can be add or delect accroding to customer;s requirement.) for example, it will send gps coordinates as below illustrated notes: ◆our gprs supports tcp or udp protocol, so please confirm whether your gprs webserver supports tcp o...
16 3. Don’t put the unit in overheated or overcooled places. 4. Handle carefully. Don’t vibrate or shake it violently. 5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent. 6. Don’t paint the unit, this may cause some foreign materials left in between the parts. 7. Don’t ...
