Xexun Tk 102-2 User Manual - page 9
9
maximum 255 in value.
5.8.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times
5.8.3 Cancel: Send notn+password to delete the “ auto track ”
Remark: the interval must not be less than 5s.
5.9 Monitoring Mode (Voice Surveillance)
Send SMS monitor+password, the response from the tracker is “monitor ok”
In this mode, the user can dial up the unit to hear the voice around the tracker after your
call.(please refer to 5.10 for instruction).
5.10 Modes switch between “track” and “monitor”
5.10.1. The default mode is “track”.
5.10.2. Send SMS monitor+password to the unit, and it will reply “monitor ok!” and switch
to “monitor”mode.
5.10.3. Send SMS tracker+password to the unit, it will reply “tracker ok!” and restore to
“track” mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movement within a district. The unit will send
message to the authorized numbers when it moves out of the district.
Notes: This function will be invalid if the unit moves outside the district. You need to
re-set it if you want this function again.
5.11.1 Send SMS stockade+password+space+latitude,longitude;latitude,longitude to the
unit to set the restricted district.
Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence,
while the second latitude&longitude is the coordinate of the bottom right corner. It will
alarm one time in each setting.
WWW.GPS-TEKNIK.SE
WWW.GPS-TEKNIK.EU
DEVELOPER@GPS-TEKNIK.SE
FORUM - WWW.GPS-TEKNIK.EU