Xexun TK-103 User Manual - page 9
9
Set up: Send SMS
“speed+password+space+080”
to the unit (support the speed is 80km/h).
For example, send SMS “speed123456 080”. "speed" as instruction, "80" as limit speed, “123456”as
password.
Cancel: Send SMS
“
nospeed+password
” to deactivate the overspeed alert.
12. Geo-fence
1) Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to
the authorized numbers when it breaches the district.
2) Set up:the user can Send SMS “
stockade+ password + space + MinLatitude, MinLongitude;
MaxLatitude, MaxLongitude
” to unit to set the restricted district. In case of breach, it will send SMS
“
stockade! + geo-info” to the authorized number.
3) For example send SMS “stockade123456 22.548123, 114.081234; 22.549123, 114.082234” to the unit.
Remark: The first latitude & longitude is coordinate of min of the Geo-fence, while the second latitude &
longitude is the coordinate of the max. It will alarm one time in each setting.
4) Cancel: Send SMS “
nostockade + password
” to deactivate this function.
This function will be out of effect after the unit moves outside the district.
13 . Restart the tracker.
Send SMS
“reboot+password”
to the tracker. For example“reboot123456”.The tracker will be restarted. It will
reply “system will reboot...”.
14. Auto track
Send SMS
“at30sum5”
to the unit, it will reply “Auto track set ok.” and report a Geo-info at 30 seconds
intervals for 5 times: The max intervals is 65535 seconds. You can send
“at30sum0”
for heaps of times.
Send
“noat123456”
to the tracker, it will reply “Cancel auto track ok.”. And the tracker will stop send messages.
15. Set ACC open and close time interval
Device can set time interval of send data when ACC open or close.
Send SMS
“accon+time interval”
to the unit, for example “accon 30”stand for when ACC open send data for
every 30 seconds.
Send SMS
“accoff+time interval”
to the unit, for example “accon 60”stand for when ACC close send data for
every 60 seconds.
16. Set ACC open and close SMS notify
Device can set SMS alarm when ACC open or close status.
Send SMS
“accnotify 1”
to the unit, for example “accnotify 1”stand for when device detects ACC open and
close status, device will SMS to authorized number.
Send SMS
“accnotify 0”
to the unit, for example “accnotify 0”stand for close this function.