Xexun xt107 User Manual

Summary of xt107

  • Page 1

    Gps tracker user manual uu preface thank you for purchasing gps tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice i...

  • Page 2: Content

    2 content 1 summary ------------------------------------------------------------------------------------------------- 3 2 application ------------------------------------------------------------------------------------------------ 3 3 hardware description --------------------------------------------...

  • Page 3: 1 Summary

    13 faults & solutions --------------------------------------------------------------------- 18 1 summary working based on existing gsm/gprs network and gps satellites, this product can locate and monitor any remote targets by sms or gprs,and guard against theft of vehicle. 2 applications z vehicle r...

  • Page 4: 3.2

    3.2 rear face back cover 4 3.3 interior sd card sim card battery.

  • Page 5: 4 Specs.

    5 4 specs. Content specs. Dim. 80mm*56mm*22mm weight 50g network gsm/gprs band 850/900/1800/1900mhz gps chip sirf3 chip gsm/gprs module sim900 gps sensitivity -159dbm gps accuracy 5m time to first fix reacquisition 0.1s cold status 45s warm status 35s hot status 1s power dc5v input battery chargeabl...

  • Page 6

    Push ownwards to open the cover pull leftwards and insert the sim card 6 fasten downwards ,make sure the sd card is mounted sd card is mounted , then fasten the sim card rightwards fasten the cover upwards put the battery.

  • Page 7: 6 Startup

    6 startup z put the sim card and sd card in place,insert the battery and the tracker is on. The green led in the middle is power indicator, yellow led on left side is gsm indicator and blue led on right side is gps indicator. Green indicator will be flashing quickly, yellow indicator will be on for ...

  • Page 8: 8.3 Authorization

    8.3 authorization 8.3.1 send sms “admin+ password+ space+ cell phone number”to set the first authorized number, it will reply “admin ok”, the other authorized numbers should be set by the first authorized number.(ps: there are only 5 numbers able to be authorized) to:13188888888 admin123456 13751187...

  • Page 9: 8.4 Auto-Track

    8.4 auto-track this function can make the tracker to send sms or gprs data in fixed interval for fixed times 8.4.1 set up: send sms t030s005n+password to the unit, it will report the geo-info at 30s’ interval for 5 times.(s: second, m: minute, h: hour).You will receive a reply as “t030s005n ok” if t...

  • Page 10: 8.5  Tlimit Function

    8.5 tlimit function 8.5.1 send “tlimit+password+ 50” (50m is the distance, 1-6000m set), reply “tlimit ok” (note: this function is for auto-tracking function only. If the later position is 50m away with the position before, it will send sms or gprs data. If less than 50m, it will not send in order t...

  • Page 11: 8.8.2

    8.8.2 cancel:send sms “nostockade+password” to deactivate this function.It will reply “nostockade ok”. From:13188888888 nostockade ok to:13188888888 nostockade123456 8.8.3 response sms format: stockade!+geo-info. It will alarm one time in each setting. From:13188888888 lat: 22.566923 long: 114.05133...

  • Page 12: 8.9.2

    8.9.2 cancel: send sms nomove+password to deactivate the movement alert,it will reply move ok response sms format: :move!+geo-info. It will alarm one time in each setting. From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00 28/11/10 03:33 f:4.32v,0, signal:f move imei:359587011016261 05 41....

  • Page 13: 8.11 Imei Checking:

    Response sms format: speed+080!+geo-info (suppose the speed is 80km/h). The tracker will check the speed in 3 minutes interval and alarm if it is overspeed. From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00 28/11/10 03:33 f:4.32v,0, signal:f speed080 imei:359587011016261 05 41.5 460 01 25...

  • Page 14: 8.13 Sos Button

    14 8.13 sos button press the sos button for 3 second, it will send “help me !+ geo-info” to all the authorized numbers every 3 minutes. It will stop sending sos sms or gprs data when one of the authorized numbers reply sms ”help me+password” to the tracker. (note: the default software only send one ...

  • Page 15: 8.19    Motion Sensor

    15 note: the sms message ◆ must in text format, can’t be pdu format. ◆please use the tracker outside for the first time so that it can get gps signal easily and quickly 8.18 gsm id(this function can be add or delect for customization.) gsm id are in each sms or gprs data. The tracker can be found by...

  • Page 16: 8.21 Switch On/off

    16 8.21 switch on/off 8.21.1 switch off press talk button and sos button for three seconds at same time, the green indicator will flash quickly until it is off. 8.21.2 switch on press talk button and sos button for three seconds at same time, the green indicator will flash quickly until it is on. 9 ...

  • Page 17: 11.1.2 Set

    17 11.1.2 set udp protocols: gprsmode+password+space+1 to set up udp protocol, tracker will reply gprsmode ok. 11.2 set ip address and port: setup: adminip+password+space+ip address+space+port. If setup successfully, the tracker will reply sms “adminip ok” cancel: send sms noadminip+password adminip...

  • Page 18

    18 12 cautions please comply with the instructions to extend the unit life: 1. Keep the unit dry. Any liquid, i.E. Rain, moisture, may destroy or damage the inside circuitry. 2. Don’t use & store the unit in dusty places. 3. Don’t put the unit in overheated or overcooled places. 4. Handle carefully....