Xftp sat lite satellite meter quick reference guide 99 washington street melrose, ma 02176 fax 781-665-0780 testequipmentdepot.Com.
Operation loading a satellite configuration to use the last satellite configuration loaded (even prior to power off), press the f4 button to go directly to the signal display mode. To load a new satellite configuration, press the find button to display the satellite configuration list. Note: the xft...
On the bar graph display, an ok will appear in the upper right corner of the display when the meter is locked on the satellite signal. Signal display after loading a satellite configuration (or pressing the f4 button to use the last configuration), the xftp sat lite shows the signal display mode wit...
• signal display - signal strength & signal quality • measurement display - ber & c/n • satellite display - satellite name & longitude signal measurement from the signal display mode, use the or direction button(s) to advance the display through the three modes: see the xftp sat lite operation manua...
• use the or direction button(s) to move through the list of stored configurations, or use the or direction button(s) to move through the list 4 configurations at a time. • press the enter button to view the configuration parameters. Changing configuration parameters from the configuration parameter...
• use the or direction button(s) to highlight the memory location for your satellite configuration, or use the or direction button(s) to move through the list 4 configurations at a time. • press the enter button to save the satellite configuration in the selected memory location. Other functions bat...
P/n 0010280000 rev. 11/07 9710 park davis drive indianapolis, in 46235 (317) 895-3600 www.Trilithic.Com 99 washington street melrose, ma 02176 fax 781-665-0780 testequipmentdepot.Com.
