XFtp SAT LITE Quick Reference Manual - Satellite Configurations
• Use the or Direction Button(s) to move through the
list of stored configurations, or use the or Direction
Button(s) to move through the list 4 configurations at a
time.
• Press the
ENTER
Button to view the configuration
parameters.
Changing Configuration Parameters
From the configuration parameter display, all parameters
(including the name for a new satellite entry) can be changed.
• With the desired configuration parameter selected, press
the
ENTER
Button.
• Use the alphanumeric keypad to enter the new value for
the configuration parameter.
• When you are finished entering the new value, press the
Direction Button or
ENTER
Button to finish editing the
configuration parameter.
To view the list of stored satellite configurations, press the
F2
or
LOAD
Button.
Satellite Configurations
Viewing Configuration Parameters
To display the parameters of the currently loaded satellite
configuration, press the
F1
or
SET
Button.