XFtp XProTec Operation Manual - page 13
XProTec Ultrasonic Distance Meter - Operation Manual
11
Measuring Area
Perform the following steps to take an area measurement;
1. To enter the Area Measurement Mode, press the AREA Button.
2. Aim the meter at the first target.
3
Press the READ Button to measure the first length of the area.
4. Aim the meter at the second target.
5. Press the READ Button to measure the second length of the area.
6. After taking the second length measurement, the area measurement
will be shown on the LCD Display.
7. To return to the Length Measurement screen at any time, press the
ESC CLEAR Button.
Measuring Volume
Perform the following steps to take a volume measurement;
1. To enter the Volume Measurement Mode, press the VOLUME Button.
2. Aim the meter at the first target.
3
Press the READ Button to measure the 1st length of the volume.
4. Aim the meter at the second target.
5. Press the READ Button to measure the 2nd length of the volume.
6. Aim the meter at the third target.
7. Press the READ Button to measure the 3rd length of the volume.
8. After taking the third length measurement, the volume measurement
will be shown on the LCD Display.
9. To return to the Length Measurement screen at any time, press the
ESC CLEAR Button.