Xiamen RP80VI User Manual - page 11
11
5.1 Indicator
S/N
Status
Function Declaration
1
Power light normally on, error light off
Normal
2
Power light normally on, error light on
Error and refer to fault code
5.2 Fault Code
Code
Buzzer Hint
Function
1
1 beep when printer is on
Initialization is finished
2
2 beep successively
Mechanism disconnect
3
3 beep successively
No paper/error
4
4 beep successively
Cutter is in error
5
5 beep successively
overheated
6
6 beep successively
Not heat
7
8 beep successively
Black mark detection error
8
9 beep successively
External RAM is in error in detection
9
10 beep successively
External FLASH is in error in
detection
5.3 Button
Serial No.
Function
Description
1
Feed
While power light is on,and ERROR light is off,when press
FEED button,printer can feed to the front of next label paper.
2
Pause
When the printer is working,if press PAUSE button,the printer
will stopping working.
3
Gap sensor
calibration
1.Close printer power
2.Make sure printer is feed paper and cover the upper cover.
3.Press on PAUSE button,and open printer power,now printer
will automatic calibrate the sensitivity of gap sensor and then