Xilinx Zynq-7000 ZC702 Quick Start Manual

Summary of Zynq-7000 ZC702

  • Page 1

    Zynq-7000 all programmable soc zc702 evaluation kit quick start guide the zynq®-7000 all programmable (ap) soc zc702 evaluation kit provides a platform for evaluating xilinx zynq-7000 ap soc devices. The zc702 kit contains the necessary hardware, tools, and ip to quickly evaluate and start the devel...

  • Page 2

    2 built-in self-test (bist) instructions zc702 evaluation kit step 1: install driver and terminal emulator install the silicon labs cp210x usb-to-uart drivers and a terminal emulator for the usb-to-uart on your pc. Install the cp210x usb to uart drivers as described in www.Xilinx.Com/kits/cp210x . X...

  • Page 3

    3 step 7: set up terminal emulator: serial setup select the same com port assigned in step 5 and set the baud rate to 115200 , the data to 8 bit , the parity to none , stop to 1 bit , and flow control to none . Click ok to save the settings. X-ref target - figure 1-5 step 8: initialize configuration...

  • Page 4

    4 xtp310 (v1.3) january 15, 2016 install xilinx tools and redeem the license voucher a vivado® design suite: design edition, node-locked, device-locked license voucher code is included with this zc702 evaluation kit and shown in step 10. Step 10: redeem the vivado tools license voucher to redeem the...