XINDAK CA-1 Instructions Manual - page 6
30
°
°
0
3
CA-1/PA-1
IR Sensoer
IR Sensoer
SLEEP
HEATING
5
Remote Control Unit
Remote Control Unit
S - 1
S - 1
S -2
S -2
S -3
S -3
S -4
S -4
B- 1
B- 1
Mute
Mute
F1
F1
Volume
Volume
-
-
+
+
R E M O T E C O N T R O L L E R
R E M O T E C O N T R O L L E R
5
7
4
2
3
1
6
8
7
6
5
2
3
1
4
8
Mute Button
F1 Sleep Button
Input Switch Button
Input Switch Button
Input Switch Button
Input Switch Button (Not available for this unit)
Balance Input Switch Button
Volume Control Button
Install Batteries
1. Use the tool remove the rear cover of the remote control unit.
2. Install the 2 batteries (AAA)
3. Reinstall the rear cover of the remote control unit.
Battery Replacement
1. Install batteries observing the correct polarity,(+) and (-).
2. Do not use new and old batteries simultaneously.
3. Batteries with similar shapes may have different rated voltages Be
sure to use the correct batteries.
4. Remove batteries from the remote control unit if it will not be used for
a long period of time.
If you use the remote control unit to control the amplifier:
1.The remote control range is approximately 5 meters.
2.Pointing the remote control on an angle to the receiver, will shorten
the useful distance of the remote control.
with correct +/-
Using Remote Controller
polarity.
Install Batteries
Battery Replacement
Using Remote Controller
S - 1
S - 1
S -2
S -2
S -3
S -3
S -4
B- 1
B- 1
Mute
Mute
Temp
Temp
Volume
Volume
--
++
R E
M O
T E
C
N T
R O
L
E R
O
L
R E
M O
T E
C
N T
R O
L
E R
O
L
AAA
AAA
!!
Incorrect use of batteries can cause corrosion or damage.
The lower temperature, the shorter battery life.
Incorrect use of batteries can cause corrosion or damage.
The lower temperature, the shorter battery life.
Operation and maintenance for remote control