XINDAK CA-1 Instructions Manual - page 9
PA-1
FQA
Q.Why operate on the input selector on panel or select switch and volume control button on
remote control, there is no response from amplifier?
A. The reason for that may because: 1. The amplifier is in preparation stage after power on. Please
wait. 2. The amplifier is in mute model, and the Mute mark glitters as 1Hz frequency. Please release
the mute;
Q. why the attached remote control can not work?
A. This problem may because: 1. there is no batteries, please take out the batteries attached, open
the rear cover of the remote control by screwdriver and install them according the exploitation on
the chapter “Operation and maintenance for remote control”. 2. The batteries is spent, please
replace the batteries. 3. There is barrier between the IR sensor and infrared emitter. 4. The remote
control has been out of the max available operation distance.
Q. Why there is no sound output after power on?
A. That may because: 1. The amplifier has not been connected to sound source or there is no
output from sound source. 2. The amplifier has not been connected to loudspeakers. 3. The signal
indication is different with the input signal, please select the correct signal channel. 4. The volume
knob is set at the 0, please set the volume in proper level.
Q. How to replace the fuse?
A. If the fuse melts, please pull out the power cord at first, then open the fuse socket on the power
input socket. After take out fuse, please check the fuse at first. If there is no black within it, please
directly replace it with the fuse in same specification. If there is fuse, which mean there is serious
fault, please contact your distributor or the service office of Chengdu Xindak Electronic Co., Ltd.
CA-1/PA-1
8
In order to help user operate this amplifier more convenient, following is some frequently asked
questions during the operation. If you want more information, please access www.xindak.com , E-mail:
service@xindak.com or call: +86 028 81688521. Chengdu Xindak Electronic will service you with all our
heart.
How To Use
How To Use