- DL manuals
- Xingtel Xiamen Electronics
- Intercom System
- CL-3684
- User Manual
Xingtel Xiamen Electronics CL-3684 User Manual - Introduction
Supports up to 4 outdoor units
2.4'' (320x240) QVGA LCD display
Video resolution: 320 x 240, with 25pics per second
Wide angle lens and LED for night vision
Long standby doorbell (battery up to 2 years or connect with
DC+9
12V )
Water-proof outdoor station Ip55
Microphone and speakerphone
Brightness and talk volume are adjustable
Remote door opening ( Optional)
DIY installation to save high labor cost
~
Crystal sound quality
Transmitting distance : with up to 200m range out of doors
Transmitting distance : with up to 50m range indoors
Introduction
2
Summary of CL-3684
Page 1
Cl-3684 wireless digital video doorbell user’s manual.
Page 2: Congratulations
3 congratulations safety precautions prior to use ...On purchasing our high quality product. Please read the manual carefully before installing your system and follow all of the directions to ensure proper installation. To reduce the risk of electrical shock and injury, please follow these basic saf...
Page 3: Introduction
Supports up to 4 outdoor units 2.4'' (320x240) qvga lcd display video resolution: 320 x 240, with 25pics per second wide angle lens and led for night vision long standby doorbell (battery up to 2 years or connect with dc+9 12v ) water-proof outdoor station ip55 microphone and speakerphone brightness...
Page 4: Unpacking
Once you have unpacked your product, make sure that all the parts shown below are available. If any pieces are missing or broken, please promptly call your dealer. Adapter (7.5v, 300ma) 3 aaa ni-mh batteries outdoor station rear cover rain cover user' s manual unpacking screws 3 receiver charger out...
Page 5: Layout
Layout camera led light microphone speaker call button (with name tag on it) sensor light outdoor station 4 technical specification outdoor station transmit frequency range 2.400ghz 2.4835ghz ~ data rate 2.0mbps transmitting power 19dbm (typ) modulation type gfsk/fsk transmitting distance outdoor:20...
Page 6: Engineering Mode
Engineering mode 1.Press and hold the and beneath at the same time about 5 seconds in standby mode, then the display will show as follow: 2.After 5 seconds, it will exit automatically. Menu registration cleared ! 1.Press and hold the and at the same time about 5 seconds in standby mode, then the dis...
Page 7: Receiver
6 the rechargeable ni-mh batteries (aaa size, come with your receiver. Install the batteries before use. 1.2v, 800mah) 1. Receiver 2. 3. To replace the battery cover, slide the cover up until it snaps in place. Reversing the orientation may damage the handset. The batteries need to be replaced if th...
Page 8: Menu Description (Continued)
With this , the camera will take a photo of visitor automatically when visitors press the button on the outdoor station. You then can pick up this photo easily in the receiver. Auto snap on call menu description (continued) note: during a conversation, the camera can take a photo of visitor if you p...
Page 9: Installation Instruction
Installation instruction receiver connect the modular end of the ac power adapter to the power jack of the charger, then plug the ac adapter into a standard ac wall outlet. Outdoor station 1.Choose a proper location for the outdoor station. Be sure to consider the average height of visitors. 2.Align...
Page 10: Chapter3: Brightness
16 chapter3: brightness this function allows you to adjust the light level (9 levels are adjustable). 1.Press beneath to display the main menu items. 2.Press or to choose then press beneath . 3.Press or to select the light level that you like. Each time you press or , the receiver displays with the ...
Page 11: Turning On / Off
To turn the indoor phone on, press . To turn the indoor phone off, press and hold . And hold turning on / off first, press the button of the , then hold the key on the back of the outdoor until the led light blinks. Once a prompt tone is heard, the has been registered to the successfully. If , the r...
Page 12: Operations
11 operations register(continued) the receiver can support up to 4 outdoor s. 1.When you have registered one outdoor , the register interface will display as follow 2.When you have registered 4 outdoor s, the register interface will display as follow : : station station station 14 chapter 1:date&tim...
Page 13: Operations
12 operations monitor about the monitor function , the lcd will automatically display the corresponding menu according to the registered outdoor s. 1.In the standby mode, press 2.When registers one outdoor , the lcd will display 1# monitor. 3.When registers two or more outdoor s, the lcd will displa...
Page 14: Operations
12 operations monitor about the monitor function , the lcd will automatically display the corresponding menu according to the registered outdoor s. 1.In the standby mode, press 2.When registers one outdoor , the lcd will display 1# monitor. 3.When registers two or more outdoor s, the lcd will displa...
Page 15: Operations
11 operations register(continued) the receiver can support up to 4 outdoor s. 1.When you have registered one outdoor , the register interface will display as follow 2.When you have registered 4 outdoor s, the register interface will display as follow : : station station station 14 chapter 1:date&tim...
Page 16: Turning On / Off
To turn the indoor phone on, press . To turn the indoor phone off, press and hold . And hold turning on / off first, press the button of the , then hold the key on the back of the outdoor until the led light blinks. Once a prompt tone is heard, the has been registered to the successfully. If , the r...
Page 17: Chapter3: Brightness
16 chapter3: brightness this function allows you to adjust the light level (9 levels are adjustable). 1.Press beneath to display the main menu items. 2.Press or to choose then press beneath . 3.Press or to select the light level that you like. Each time you press or , the receiver displays with the ...
Page 18: Installation Instruction
Installation instruction receiver connect the modular end of the ac power adapter to the power jack of the charger, then plug the ac adapter into a standard ac wall outlet. Outdoor station 1.Choose a proper location for the outdoor station. Be sure to consider the average height of visitors. 2.Align...
Page 19: Menu Description (Continued)
With this , the camera will take a photo of visitor automatically when visitors press the button on the outdoor station. You then can pick up this photo easily in the receiver. Auto snap on call menu description (continued) note: during a conversation, the camera can take a photo of visitor if you p...
Page 20: Receiver
6 the rechargeable ni-mh batteries (aaa size, come with your receiver. Install the batteries before use. 1.2v, 800mah) 1. Receiver 2. 3. To replace the battery cover, slide the cover up until it snaps in place. Reversing the orientation may damage the handset. The batteries need to be replaced if th...
Page 21: Engineering Mode
Engineering mode 1.Press and hold the and beneath at the same time about 5 seconds in standby mode, then the display will show as follow: 2.After 5 seconds, it will exit automatically. Menu registration cleared ! 1.Press and hold the and at the same time about 5 seconds in standby mode, then the dis...
Page 22: Layout
Layout camera led light microphone speaker call button (with name tag on it) sensor light outdoor station 4 technical specification outdoor station transmit frequency range 2.400ghz 2.4835ghz ~ data rate 2.0mbps transmitting power 19dbm (typ) modulation type gfsk/fsk transmitting distance outdoor:20...
Page 23: Unpacking
Once you have unpacked your product, make sure that all the parts shown below are available. If any pieces are missing or broken, please promptly call your dealer. Adapter (7.5v, 300ma) 3 aaa ni-mh batteries outdoor station rear cover rain cover user' s manual unpacking screws 3 receiver charger out...