Xingtel Xiamen Electronics CL-3684 User Manual - Receiver
6
The rechargeable Ni-MH batteries (AAA size,
come with your receiver. Install the batteries before use.
1.2V, 800mAh)
1.
Receiver
2.
3. To replace the battery cover, slide the
cover up until it snaps in place.
Reversing the orientation may damage the handset.
The batteries need to be replaced if they do not
recover their full storage capacities after recharging.
When replacing the batteries, always use good
quality Ni-MH re-chargeable batteries. Never use
other batteries or conventional alkaline batteries.
Notes:
Installing Batteries
Insert new batteries as indicated,
matching correct polarity(+,-).
19
Chapter 7:Default Setting
Note:
If you reset the receiver to the factory default, all of the
settings will return to the factory default.
You can save or delete the recorded photos under this menu.
The outdoor station's number will also be displayed on the upper
left of photo correspondingly.
1.Press beneath
to display the main menu items.
2.Press
or
to choose , then press
beneath
.
3.Press
or
to browse pictures.
4.
The display will show
, Press
beneath
to confirm. After a beep the LCD shows the next photo.
5.Press beneath
to return to the previous menu.
Menu
Up
Down
Select
Left
Right
Delete?
Yes
Back
If you want to delete the photo, use
or
to
choose the photo you want to, then press the
beneath
Left
Right
Del.
Chapter 6: Snap Show
This function allows you to reset the receiver settings to the
factory default.
1.Press beneath
to display the main menu items.
2.Press
or
to choose , then press
beneath
.
3.Press
or
to choose
or
to enable
or disable the function.
4.Press beneath
to save the settings.
After resetting, the receiver will return to standby mode.
Menu
Up
Down
Select
Up
Down
YES
NO
Select
Result: