Xinpu XP-R26DA Handling Instructions Manual - page 10
Drill bit
Core bit (outer diameter)
Core bit shank
25mm
29mm
(A)
32mm
35mm
38mm
Core bit shank(A)
Φ8x110mm
(B)
45mm
50mm
Core bit shank(B)
4. Demolishing operation (hammering only)
Bull point (Round type) (SDS-plus shank)
+
5. Groove digging and edging (hammering only)
Cold chisel (SDS-plus shank)
+
Cutter (SDS-plus shank)
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
+
7. Drilling holes (rotation only)
{ Drill chuck, Drill chuck shank(G), special screw and Drill chuck key
+ + +
Special screw Drill chuck (13VLRB-D) Drill chuck shank (G)
(SDS-plus shank)
Drill chuck key
{ 13mm Drill chuck ass’y (includes Drill chuck key) and
chuck (for drilling in steel or wood).