Xitrix TravelPro SR-200 Series Installation And Troubleshooting Manual - page 11
The minimum specifications for the flexible cord
are No. (1)18 AWG, (2) Type SJ, and (3) 3-
conductor.
B.
For Japan:
All components of the cord set must bear a “PSE”
or “ T ” mark and registration number in
accordance with the Japanese Dentori Law.
The minimum specifications for the flexible cord
are: (1) .75m ㎡ conductors, (2) Type VCT or
VCTF, and (3) 3-conductor.
The cord set must have minimum rated current
capacity of 7 A.
The attachment plug must be a two-pole, grounded
type with a Japanese Industrial Standard C8303
(15 A, 125 VAC) configuration.
C.
For Other Countries:
The cord set fittings must bear the certification
mark of the agency responsible for evaluation in a
specific country.
The flexible cord must be of a HAR (harmonized)
type H03VV-F.
The cord set must have a current capacity of a
least 2.5 Amperes and voltage rating of 125 or 250
Vac.
CAUTION: MODEL XPN-SR200 IS DESIGNED TO USE
WITH THE FOLLOWING AC ADAPTER MODEL ONLY
Model: 0335C2065 (65W)
Model: ADP-65HB AD (65W)
Model: HP-OK065E03 (65W)
* Contact Xitrix if you need to replace your AC Adapter
18. When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These precautions
includes the following:
Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
3