Xitrix TravelPro SR-200 Series Installation And Troubleshooting Manual - page 21
LED Status Indicator
System & Power Status Indicators
LED Graphic
Symbol
Indication
Blue light indicates the WLAN module is active.
Persistent green light indicates the Silent mode is
enabled.
Blinking green light indicates the Suspend Mode is
enabled.
Blinking orange light indicates the battery is being
charged.
Blinking red light indicates the battery power is low when
the system is turned ON.
Persistent green light indicates the Power is ON.
Green light indicates the hard drive and/or optical drive is
being accessed.
6.
Wireless On/Off Switch
7.
Microphone/Audio Line-in Jack
8.
Stereo Headphone/SPDIF-out Jack
9.
4-in-1 Card Reader
The 4-in-1 Card Reader supports SD Card, MMC Card, MS and
MS-Pro Card.
10.
Touchpad Buttons
11.
Touch Pad
12.
Power / Suspend Button
Press momentarily to turn on the system.
Press and hold for at least 4 seconds to turn off the
system.
Press the power / suspend button again to return from
the suspend mode.
Persistent green light indicates the Power is ON
13.
Silent Mode Button
Pressing the key enables the system to lower its power usage;
therefore the fan speed is reduced to achieve lowest operating
noise. Persistent green light indicates the silent mode.
13