Xiyuan XY-B02 User Manual - page 11
function that will, on command set a 01-99km radius “bubble”
around the device. Movement within this area is ignored.
Crossing outside can become an SMS alert. To set the GeoFence,
from the master controller;
!
10.1 SMS:
*fence*1-99*
!
Device Response:
“Notice: The GeoFence is set. Radius is set
to XXX km”
Movement that exits the geofence will be immediately texted
to the master controller as a “Notice: GeoFence Exit Alert.”
!
To disable the Geofence,
10.2 SMS:
*fenceoff*
Device Response:
“Notice: The Geofence is disabled.”
!
It should be noted, that if you disable the SMS, Movement Alert
and the Movement Call Alert; but have the GeoFence Alert in
place, the first message notifying you of movement will be the
GeoFence Exit.
!
!
11. Status query
SMS:
*status*
System Health and status check. Returns text message
indicating various system diagnostics
!
12. Multi Controller
This allows any SMS enabled cell device to query the unit for
location, status, etc.
!
12. 1 SMS:
*multiquery*
“Notice: Multi query feature enabled.”
!
12. 2 SMS:
*multiqueryoff*
The unit will now only respond to the Master controller.
!
Device Response: to the Master Controller:
“ Notice: Multi
query feature disabled.”
!