Xiyuan XY-B02 User Manual - page 3
!
!
4.2 SIM Card Installations and Removal
a. Insert SIM card into the SIM slot, metal face up, clipped
corner to the right.
b. Red LED light will start flashing. Green light and Blue light will
be flashing for couple seconds and then turns to steady green on
for about 10 seconds
c. Call the device SIM number and it is supposed to get through
without answer.
!
!
!
!
5. Operation Commands Guide
!
5.1 Set APN:
(VERY IMPORTANT AND MUST BE DONE
1ST) For the device to send data to the server, this
command MUST be enabled.
!
SMS:
*apn*AXXX*BXXX*CXXX*
This command sets the
telecom Access Point Name. BXXX refers to user name, CXXX
refers to password.
!
If there is no user name and password required, send as
*apn*AXXX*
!
If there is user name but no password required, send as
*apn*AXXX* BXXX*
!
!
APN information can be checked on local telecom website.
!
You will receive the following text: "Notice: APN is set to XXX.
User name: XX. Password: XX”
!
!
5.2 Registering the “Master” Controller
SMS to the device:
*master*123456*+1XXXXXXXXXXXX*
,
(For instance, master controller phone number is