Packaging model: txm10xx radio model: txm1000 portable satellite radio receiver quick guide warning: this manual contains important safety and operating information. Please read, understand and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or da...
2 tao xm2go accessories tao xm2go receiver remote control home antenna vehicle power adaptor home power adapter headphones belt clip/stand audio cable home stand (it is possible that not all accessories are included in your package, depending on packaging model. Please consult your packaging.).
3 protective case vehicle antenna cassette adaptor rechargeable lithium ion battery flush mount vent mount cleaning kit vehicle cradle swivel mount (with extra adhesive pad).
4 ready... Install the battery be sure to charge your battery for several hours on the home stand before use, or untill charging complete message appears. Getting set up 1 set up assemble your tao xm2go and its home stand as shown. 2.
5 connecting to a stereo plug the ac adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (pc type) speakers. 3 controls turn on your tao xm2go by pressing the power button. You should be able to hear channel 1, the xm preview channel, throu...
6 2go button – store up to five hours of xm programming using the “my xm” time-shifting memory mode mode button – switch between “live” xm and “my xm” time- shifting memory mode arrow buttons – cycle through channel categories (“live”); skip to previous or next song (my xm”) preset/direct button – s...
7 aiming the home antenna if you do not hear channel 1, the xm preview channel, and the screen displays “no signal,” try moving your tao xm2go’s antenna to another location. Make sure the antenna points south outdoors or through a window. Complete instructions, including an optional activation setup...
8 ready... Turn the dial to highlight channel 0, and press the dial into select it. You should see an 8-character xm radio id in the display. (the xm radio id should also be on your tao xm2go’s package and under the battery.) write the id here: xm subscription required for reception of xm service. N...
9 channel section mode – direct entry or preset banks a, b, or c signal strength – 0 to 3 bars channel name additional info – volume/playback bars, stock ticker, and info extras clock channel number artist name song or program title listening mode – show current listening mode (“live” or my xm”) ala...
10 rotate the dial to preview a list of channels. When you find one you’re interested in, press the dial in to tune to that channel! If you want to tune to a channel and know its channel number, you can use the number keys. Press the “pre/dir” button until “direct” flashes in the display. Press the ...
11 to store by pressing one button: 1. Turn on your tao xm2go and select a channel. 2. Press the “2go” button. To prevent you from accidentally recording over a previously stored program, your tao xm2go will ask you to confirm. Press the “2go” button again. The center of the top line of your tao xm2...
12 for more... Advanced features & additional info.
13.
This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation. The tao tao xm2go satellit...
Giant international ltd. 3500 lenox road. Suite 630 atlanta, ga 30326 phone 1.800.638.5048 www.Taolife.Com tao and the tao logo are trademarks of giant international (usa), ltd. The xm name, xm2go, tuneselect, and related logos are trademarks of xm satellite radio inc. Printed on recycled paper ©200...
