1. DL manuals
  2. Xo
  3. Ventilation Hood
  4. XOS30S
  5. User Manual

Xo XOS30S User Manual

Other manuals for XOS30S: User Instructions

Summary of XOS30S

  • Page 1

    Range hood - user instructions hotte de cuisine - notice d’utilisation campana extractora - manual de utilización usa f e xos30s xos36s need help? Call our ventilation experts toll free al 800-966-8300 avez-vous besoin d’aide ? Contactez nos experts au numéro gratuit 800-966-8300 ¿necesita ayuda? Pó...

  • Page 2

    Proof of original purchase date and invoice is needed to obtain service under warranty. Limited 2 year warranty. For 2 years from the original date of purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood that fails because of a man...

  • Page 3: English

    - 3 - important safety instructions for residential use only read and save these instructions please read entire instructions before proceeding. Important: save these instructions for the local electrical inspectors use. Installer: please leave these instructions with this unit for the owner. Owner:...

  • Page 4

    - 4 - crepes suzette, cherries jubilee, peppercorn beef flambè ). C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. D. Use proper pan size. Always use cookware appropriate for the size of the surface element. E. Keep fan, filters and grease laden surf...

  • Page 5

    - 5 - d. Ducted fans must always be vented to the outdoors. E. This unit must be grounded. Warning - to reduce the risk of fire, use only metal ductwork. Warning - under certain circumstances domestic appliances may be dan- gerous. A. Do not check filters with hood working. B. Do not touch the lamps...

  • Page 6: Installa

    - 6 - installa tion p repar ation duct fittings: this hood must use an 6" round duct. It can transition to 3-1/4" x 10" or 3-1/4" x 12" duct. Use this chart to compu- te maximum permissible lengths for duct runs to outdoors. Note: do not exceed maxi- mum permissible equivalent lengths! Maximum duct ...

  • Page 7: Warning Fire Hazard

    - 7 - warning fire hazard never exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Use single wall rigid metal ductwork only. Fasten all connections with sheet metal...

  • Page 8: D Sp

    - 8 - h oo d sp ecific ations › front of hood › side of hood › top of hood › mounting height and...

  • Page 9: Installation Instructions

    - 9 - fig.1 fig.2 installation instructions installation - vented to the outside 1. Mount to the wall: drill the holes a respecting the distances indicated (fig.1). Fix the appliance to the wall and align it in horizontal position to the wall units. When the appliance has been adjus...

  • Page 10: Power Supply:

    - 10 - power supply: important – (please read carefully) warning: for personal safety, this appliance must be properly grounded. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance. Follow national electrical codes...

  • Page 11

    - 11 - 2. Connect electrical: warning - to reduce the risk of fire, electric shock, or injury to per- sons, observe the following. • power supply connection: for connection to the power supply refer to the following fig.3: 1. Remove the power supply cover by undoing the (2) screws fig.3a. 2. Break t...

  • Page 12

    - 12 - fig.4 xov30s - xov36s 3. Connect the ductwork: code, ansi/nfpa 70-1999. 5. Insert the wires into the box, then close the box cover, securing it using the screws that were previously removed. The appliance should be installed at a minimum height of 27" up to a maximum hei...

  • Page 13

    - 13 - 4. Install the duct cover: arrange the electrical power supply within the dimensions of the decorative flue. If your appliance is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening. Adjust the width of the support bracket of the upper...

  • Page 14: �

    - 14 - ductless recirculating option: fig.1: remove the 2 screws e and have the top flue f go into the bottom flue g. Remove the two flues f-g and place them on a flat surface. Carbon filter kit xorfk05: the kit includes an air diverter a, 2 screws and 2 expan- sions plugs b1, 2 sc...

  • Page 15: �

    - 15 - fig.2: remove the bracket h by loosening the screws e and throw it away. Fig.3: center the air diverter a in the middle of the hood and posi- tion it as high as needed. Follow the indicated quotas to drill the holes and fasten the diverter using the screws and e...

  • Page 16: �

    - 16 - fig.6: remove the aluminum panels by pulling the lever 1 out and pushing downwards 2. Fig.7: the filters c must be applied to the suction unit inside the hood, centering them inside of it and turning them 90° until they snap into place. Fig.8: put the aluminum panels back in pla...

  • Page 17: Use

    - 17 - use • if the apparatus is equipped with the following controls: a = light b = off c = speed i d = speed ii e = speed iii g = motor working indicator .

  • Page 18: Maintenance

    - 18 - maintenance •we recommend that the cooker hood is switched on before any food is cooked. We also recommend that the appliance is left running for 15 minutes after the food is cooked, in order to thoroughly eliminate all contaminated air. The ef- fective performance of the cooker hood depends ...

  • Page 19

    - 19 - - do not allow deposit to remain for long periods of time. - do not use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface causing rust. - do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for...

  • Page 20: Fuse

    - 20 - fuse • the halogen lamps circuit is controlled by a fuse 5x20 mm, 125v 5a. In case of necessity it can be replaced only by spe- cialized personnel. • replacing halogen light bulbs: to replace the halogen lamps b, from the inside of the cooker hood press downwards with two fingers as shown in ...

  • Page 21: Xos30S - Xos36S:

    - 21 - xos30s - xos36s:.

  • Page 22: Options and Accessories:

    - 22 - options and accessories: model xorfk05 ductless recirculating filter kit model xoedcs - duct cover extension this accessory is available for installation with ceiling heights above 9ft to 10 ft..

  • Page 23: Installation Preparation:

    - 23 - installation preparation: check installation hardware: locate the hardware package packed with the hood and check contents. Type description n° a 1/8" x 1/2" screws for attaching the decorative flue to the mounting bracket. 2 duct bracket aluminum filter 2-piece decorative duct cover (dimensi...

  • Page 24: Xos Spec Sheet

    - 24 - xos spec sheet model: xos30s - xos36s sizes: 30"-36" depth: 19-11/16" features and benefits: - 600 cfm high velocity blower optimally removes smoke, grease and odors. - 3 speed push button controls. - two 50 w halogen lights - provide brilliant illumination over the cooking surface. - aluminu...