Xomax XM-2DTSBN706 Instruction Manual - page 8
Instruction for
the
operation of touch screen
9. Instruction for the GPS operation
Insert the GPS navigation card into the GPS card slot and press the 【GPS】icon on
the main menuto enter GPS main interface. Press [setting] icon to set GPS path setting,
language setting, video adjustment, screen adjustment, touch validation and check the
version information; After the navigation path is set, press [navigation] icon to enter the
interface of navigation map.
9.1 GPS Main interface
9.2 GPS setting interface
9.2.1 Set the end point of the actual navigation:
the road have been found in the map interface, the point on the map where you want
to end, and then point into the map to the right of [cursor] menu - upper right [set as
Destination] set end point (Set the end point to completed,there will be a mosaic flag.),
in the case of satellite navigation can be had.
If you want to simulate navigation on another point in the lower right corner of the
interface [More Options] in the [Set as Start] set the starting point (starting point there
will be blue flags), then gps automatic planning the paths between the start and end.
NOTE:Password for into the GPS settings menu : 888888
15
06
Instruction for the operation of touch screen
4. Instruction for the setting Operation
4.1 General setting
The general setting interface may switch the startup picture, switch button sound and
the high and low impedance of the steering wheel.
4.2 Time setting
Time setting can set the year, month, date and time of the system.
4.3 Language setting
The language setting can set the language display of the operating system.