Xomax XM-RSU256BT User Manual - page 8
6
play the tracks from the one you inserted last.
● This unit can play MP3 directly from USB/SD/MMC storage device.
● If the player emits no sound or does not recognize the USB/SD/SDHC/MMC memory,
remove the storage device and connect it again. If this does not work either, press the
shortly
button to select the signal source.
● Only disconnect the external unit after you have switched to a different signal source by
pressing
shortly, or if you have turned off the player. Otherwise the data on the
device maybe damaged.
● Never disconnect an external unit while playback is in progress.
● When you connect a storage device, playback starts with the first track. If you previously
listened to the same device and have not removed it, playback will start at the last played
track, even if you have turned off the player in the meantime.
● To disconnect a USB plug, simply remove it from the socket; to remove an SD/SDHC/MMC
card, press first, then pull out. When inserting a memory card, you need to press it in firmly.
If properly connected, the card does not stick out from the player and the magnetic lid can
be closed.
● The angled corner of the SD/SDHC/MMC should be at the top in the front, with the
connectors visible on the right. Never touch the connectors with your hand.
● You can only plug in a USB stick in one way. If it is stuck, turn it upside down and try again;
do not force it into the slot.
● Make sure that the storage device sticking out of the player does not prevent you from
driving safely; do not hit the memory stick or break it off. SD cards are preferred because
these can be
used even with the magnetic lid closed.
● It is very important to keep the USB/SD/SDHC/MMC connectors clean both in the player
and on the storage device. The connectors must be clean of hair, dirt, dust etc.
● It is not recommended to connect both a USB stick and an SD card at the same time to the
player.
● If you leave the storage device in your car when the temperature is extremely high or low,
the device may be damaged.
Press this button to toggle between playback and pause.
2/INT
Track intro function: the player plays the first 10 seconds of every available MP3 track. The
display shows the current track number and the symbol INT flashing. If you choose to play an
entire track, press 2/INT again to exit the intro mode and continue playing the current track.
3/RPT
If you press this button during playback, the player will repeat the current track in an endless
loop. The display then shows ONE symbol.If you press the button again to turn off repeat one,
and then press again to repeat all songs, and it will display ALL. You can seek new tracks
with the back and next buttons; the player will always keep repeating the last selected track.
4/RDM
If you press this button during playback, the player will play all available tracks in a random
order. This can make even a well-known collection of tracks exciting again. The display
shows RDM.If you press the button again, playback will continue in the original order.