XOVision X403BT Operation Manual - page 5
01
5
Before You Start
11
44
Type of disc
VCD
MP3
CD
NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.
DVD
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
PRECAUTIONS
This unit can play the following discs only:
Label on the disc
Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
Besides playing the discs above, the unit also can be connected to other connector.
Please refer to the details on page 19 before you playing them.
MPEG-4
Sound and moving
pictures
AUX
Press SRC to switch to the AUX mode:
AUX Touch Screen Menu
AV SET
VOL+
VOL-
For more details to adjust AUDIO and PIC-
TURE, please refer to pages 18 to 19.
To adjust VIDEO ADJUST, a disc should be
inserted and played normally at first.
To decrease the volume
To increase the volume
VOL+
VOL-
AV SET
SRC
BLUET
BLUET
To enter into the bluetooth mode