XP Metal Detectors ADX150 Wireless Ready Instruction Manual - page 12
11
C A R E
I N S T R U C T I O N S
Our detectors are designed to be as robust as possible, however, like any
electronic precision instrument, they require some care.
The XP search coil cable has been designed so as to resist long term
movement. However you should take some precautions and prolong the
life of your detector :
Ö
to remove the connector from the control box, it is important never to pull
the cable but the connector.
Ö
It is important to leave enough slack at the bottom of the cable near the
coil to allow for adjusting the coil angle without placing strain on the coil.
Ö
It is important not to replace the Velcro with tape as this will centre the
movement on one single part of the cable.
Ö
when the box is hipmounted, put it on your side or on your back in order
not to fold the cable of the connector when you lean forward. (Diagram 1)
Ö
when the box is hipmounted, to prevent strain on cable and connector,
you should slide the cable through the hipmount bag belt strap. Diagram 2
diagram 2
diagram 1
Not adhering to these precautions will lead to long term damage
of the cable and void the warranty due to user negligence.
ª
In the event of nonprolonged use, remove the alkaline
batteries from the detector.
ª
Do not expose your detector to high temperatures.
7