1. DL manuals
  2. Xpelair
  3. Fan
  4. DX100HPTR
  5. Installation And Maintenance Instructions Manual

Xpelair DX100HPTR Installation And Maintenance Instructions Manual

Manual is about: Simply Silent

Summary of DX100HPTR

  • Page 1

    Xpelair simply silent tm dx100 fan installation and maintenance instructions dx100r (93005aw) / dx100s (93025aw) standard dx100tr (93006aw) / dx100ts (93026aw) timer dx100pr (93007aw) / dx100ps (93027aw) pull cord dx100htr (93008aw) / dx100hts (93028aw) humidistat, timer dx100hptr (93009aw) / dx100h...

  • Page 2: Made By Children.

    This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Chi...

  • Page 3

    Back plate fixing positions front cover removal depress cover latch with tool & remove cover a c b.

  • Page 4

    Minimum 30 seconds maximum 30 minutes factory settings: timer 15 minutes, rh 75% d e f.

  • Page 5

    Wiring and setting up g1.

  • Page 6

    Wiring and setting up g2.

  • Page 7

    G3.

  • Page 8

    Installation if wall mounting the fan, you will also need: a 100mm diameter prepared hole. An appropriate external wall grille and Ø100mm wall sleeve duct (supplied). Cut ducting to correct length if required. The wall tube supplied is telescopic and can be extended to 300mm maximum. If ceiling moun...

  • Page 9

    6. Install the isolating switch and on/off switch (if required). 7. Make all connections within the isolating switch and the on/off switch (if required). For australia only – dx100r / dx100s / dx100pr / dx100ps / dx100pirr / dx100pirs connection to the supply can be made by a flexible 2-core cable c...

  • Page 10

    Fan settings. Speed setting the fans are factory set to low speed, but have two speed settings for different applications. Select either high or low speed by connecting the jumper between the centre and high or low speed pin on the jumper (see figure g). Dx100tr / dx100ts / dx100pirr / dx100pirs onl...

  • Page 11

    Dx100pr / dx100ps only operate the fan by pulling and releasing the cord. Repeat to switch off. Dx100htr / dx100hts only. Automatic mode - the fan automatically adjusts to slow changes in natural humidity levels without operating the fan. If the humidity levels increase at a rate slower than 5% rh i...

  • Page 12

    Guarantee. Uk only: we, redring xpelair group limited, provide a guarantee against faulty parts and manufacture for a period of 2 years from the date of purchase. In the unlikely event of a product breakdown during the guarantee period the product should be returned to the place of purchase or to re...