Wall/window fan range gx6 installation and maintenance instructions retain for future reference ® gb f d nl i a no gr.
A b c d glass window 6 ( see ) f 13.
E1 e2 e3.
G1.
G3 g2.
G4 h g4.
I.
Gb this appliance is intended for connection to fixed wiring. Check that the electrical rating shown on the appliance matches the mains supply. Warning: this appliance must be earthed. All installations must be supervised by a qualified electrician. Installation and wiring must conform to current ie...
These models are permanently connected to the supply and operation is controlled by a remote switch. They should be directly wired to the supply through an approved 10a wall mounted surface switch with at least 3mm clearance between contacts. If working above ground level, appropriate safety precaut...
● the fan is operated by a remote switch. The fan indicator light shows when it is switched on. ● an integral timer provides an adjustable overrun period after the fan is switched off. Condensation operation ● the fan operates automatically if the relative humidity is above the set level. ● the inte...
3. Percer les trous et introduire les fixations d'ancrage convenant au type de mur. 4. Visser fermement la grille extérieure en place, et poser les chapeaux de vis. Ne pas trop serrer. 5. Introduire les deux couvercles de vis dans les deux trous de fixation de la grille extérieure. 6a. Si le câblage...
Réglage de l'humidistat le capteur d'humidité interne est réglé en usine à environ 70%. Ce niveau est réglable entre environ 50% et 90% d'humidité relative. Retirer la grille/le volet anti-refouleur (cf. "montage du ventilateur dans le trou"). Tourner la vis de réglage marquée "h" dans le sens contr...
Bs en iso 9001 fm 02118 leaflet part no. 21720aa (revision. B) ● do read all the instruction leaflet before commencing installation. ● do install each fan with a double pole-isolating switch. ● do consult a glazier on the appropriate glass thickness for your size of window. ● do make sure the mains ...
