Xpelair Xplus2 EC RFH Manual - page 6
[6]
INSTALLATION WIRING AND CONTROL OPTIONS:
Important:
Read all the instruction leaflet before commencing installation
Ensure the mains supply is switched off before attempting to make electrical connections or carry out
any maintenance or cleaning
Wiring Installations:
All installations must be supervised by a qualified electrician.
Installations and wiring must conform to current IEE regulations (UK), local or appropriate regulations (other countries).
A means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
Check that the electrical rating shown on the fan matches the mains supply.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance is intended for connection to fixed wiring.
Switches and controller options:
This fan is designed to operate with the Xplus2 EC RFH switch (92915AW) only.
Power and control installation process:
Cable Specification:
A double insulated cable used with a cable cores greater than 0.75mm
2
; which has been appropriately
specified for this specific application by a qualified professional.
WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE
ISOLATED FROM THE POWER SUPPLY DURING INSTALATION OR
MAINTENANCE.
[7]
If you have any queries regarding the installation of this product please call the Technical Hotline +44 (0) 8709
000430. Our engineers are there to help during normal office hours (UK only) and may be faxed at all times on +44 (0)
8709 000530.
Customers outside the UK please contact your local Xpelair distributor, details of which are available from the UK office.
Step 1 – Locate the electrical cover.
Step 2 – Open the electrical cover by removing
the 3 captive screws.
Step 3 – Identify the following features:
PCB Plug Socket
Speed control Potentiometers
Cable Labyrinth
Cable Clamp
Step 4 – Locate the PCB termination plug
(supplied in the product’s box)
Step 5 –
Identify the correct power
connections for your Xplus2 EC RFH systems
design.
Step 6 – Connect the power cable to the PCB
termination plug and fix with a screwdriver.