Xplorer 3D PRO User Manual - Installing Xplorer 3D Pro
INSTALLING XPLORER 3D PRO
1. Before you begin, make sure your computer has a working internet
connection and that it‟s connected to the mains or has enough charge left
in its battery.
2. Next, log on to www.Xplorer3D.com and download the most recent version
of XPLORER ENGINE & XPLORER 3D DRIVERS for your particular operating
system or find one in the SD-card given.
3. After XPLORER ENGINE & Driver has finished downloading, go to the
download folder and run both the installation file one by one or install from
SD-card.
4. Follow the installation instructions to the end, selecting the desired options.
5. Run XPLORER ENGINE as administrator by right clicking on the shortcut on
your Desktop or Applications menu and selecting “Run as Administrator”.
6. After installing XPLORER ENGINE, follow the steps in the bed leveling wizard
to calibrate your XPLORER 3D PRO.
1. Make sure you‟ve removed all the printer‟s packaging material and check
to see if the main switch is in the “off” position.
2. Attach the power cable, connecting it first to the XPLORER 3D PRO printer,
and next, to the socket.
1
2