Xplova X5-Evo Quick Manual - Getting Started
EN
GETTING STARTED
Charging the X5-Evo to 100%
For initial use, you need to charge the built-in battery (by the
provided USB cable) for at least 5 hours. To prevent corrosion,
thoroughly dry the Micro USB port, weather cap and the surrounding
area before charging or connecting to a computer.
Please pull out the weather cap from the Micro USB port with care
to avoid breakage. When charging process is completed, please
ensure to put it back in snuggly.
NOTE
- The X5-Evo can be charged while using. Please be aware that the
Micro USB port is not water-resistant. Do not attempt to charge
X5-Evo in the rain or excessive moisture conditions.
- The operating temperature range for X5-Evo is from -10°C to 50°C.
- Do not leave X5-Evo in high temperature (over 60°C) and damp
environments.
Installing the X5-Evo on the bike
1.
Attach the Extended Out-Front Bike
Mount on the bike handlebar. Align it
with the bike stem and tighten the
screw. Ensure that the mount is
securely locked and parallel with the
ground level toward the front.
2.
Hold X5-Evo firmly and turn it
toward the right. Place it
horizontally on the mount notch and
press downward slightly.
3.
Turn 90-degrees counterclockwise
to lock it on the bike mount.
4.
Eventually X5-Evo is parallel to your
stem. You can operate with ease.