XPower PowerSource 400 Owner's Manual - page 3
Features
975-0265-01-01
3
Features
1
2
3
4
5
6
7
8
10
9
Rear View
Feature
Description
1
Fault LED illuminates red when PowerSource 400 has an operation fault.
2
Power button turns PowerSource 400 on and off when pressed for at least 2
seconds.
•
Turning the unit on activates the LED screen and the five AC outlets.
When the unit is on, the unit can charge itself, provide AC power when
connected to utility power, and provide backup power.
•
Turning the unit off removes power from the five AC outlets, even when
the AC Power Cord is connected to utility power.
3
AC Power/Battery LED illuminates green when utility power is available
and flashes amber when PowerSource 400 is running off its internal battery
to provide backup power.
4
LED Screen indicates charging status, power draw from the PowerSource
400 (W), or battery capacity (%). The screen also shows error codes to aid
troubleshooting.
5
Select Button displays PowerSource 400 Battery Level (%) or Output Power
(W).
6
Charged/Charging LED (green) illuminates when PowerSource 400 is fully
recharged and flashes while
PowerSource 400
is recharging.
7
AC Power Cord
8
Blue LED illuminates the rear AC outlets when a power outage occurs.
9
15 A circuit breaker protects PowerSource 400's AC outlets and your
applications from overload conditions.
10
Five 120V AC outlets for powering office equipment and household
appliances that draw a maximum total of 400 watts. All outlets are surge
protected and backed up by the PowerSource 400 internal battery.