XPower PowerSource 400 Owner's Manual - page 7
Specifications
975-0265-01-01
7
Specifications
Electrical Specifications
General Specifications
All specifications are subject to change without notice.
Warranty
What does this warranty cover?
This Limited Warranty is provided by Xantrex
Technology Inc. ("Xantrex") and covers defects in workmanship and materials in your
XPower PowerSource 400. This warranty period lasts for 1 year from the date of purchase
at the point of sale to you, the original end user customer. You require proof of purchase to
make warranty claims.
What will Xantrex do?
Xantrex will, at its option, repair or replace the defective
product free of charge, provided that you notify Xantrex of the product defect within the
Warranty Period, and provided that Xantrex through inspection establishes the existence
of such a defect and that it is covered by this Limited Warranty.
Xantrex will, at its option, use new and/or reconditioned parts in performing
warranty repair and building replacement products. Xantrex reserves the right to
use parts or products of original or improved design in the repair or replacement.
If Xantrex repairs or replaces a product, its warranty continues for the remaining
portion of the original Warranty Period or 90 days from the date of the return
shipment to the customer, whichever is greater. All replaced products and all
parts removed from repaired products become the property of Xantrex.
Xantrex covers both parts and labor necessary to repair the product, and return
shipment to the customer via a Xantrex-selected non-expedited surface freight
within the contiguous United States and Canada. Alaska and Hawaii are
excluded. Contact Xantrex Customer Service for details on freight policy for
return shipments outside of the contiguous United States and Canada.
If your product requires warranty service or troubleshooting, please contact
your dealer. If you are unable to contact your dealer, or the dealer is unable to
provide service, contact Xantrex directly at:
What proof of purchase is required? In any warranty claim, dated proof of
purchase must accompany the product and the product must not have been
disassembled or modified without prior written authorization by Xantrex.
Proof of purchase may be in any one of the following forms:
•
The dated purchase receipt from the original purchase of the product at point
of sale to the end user, or
•
The dated dealer invoice or purchase receipt showing original equipment
manufacturer (OEM) status, or
•
The dated invoice or purchase receipt showing the product exchanged under
warranty
What does this warranty not cover? This Limited Warranty does not cover
normal wear and tear of the product or costs related to the removal, installation,
or troubleshooting of the customer's electrical systems. This warranty does not
apply to and Xantrex will not be responsible for any defect in or damage to:
a) the product if it has been misused, neglected, improperly installed, physi-
cally damaged or altered, either internally or externally, or damaged from
Output Specifications
Output power (max. continuous)
320 W (650 VA)
Output power (5 minutes)
400 W
Surge power (peak)
640 W
Output voltage (nominal)
120 VAC
Output frequency
60 Hz ±1 Hz
Output wave form
Modified sine wave
Transfer switch
12 A/12 milliseconds
Surge suppression
Yes
Inverter on (no-load current draw)
Charging time
20 hours from 120 VAC
12 V DC Specifications
Internal battery type
Sealed lead acid, AGM
Internal battery capacity
40 amp-hours
Internal battery voltage
12 VDC (nominal)
Low battery alarm
11.0 V (nominal)
Low battery shutdown
10.5 V (nominal)
Internal charger charging current
2 A DC maximum
Operating/Storage temperature 32 °F–86 °F (0 °C–30 °C)/32 °F–104 °F (0 °C–40 °C)
Dimensions (H × W × L)
18.5 × 4.25 × 10.5" (47 × 10.8 × 26.7 cm)
Weight
32 lb (14.5 kg)
Approvals
UL Listed to UL 1778 2nd Edition and CSA C22.2 no. 107.1-01 standby UPS Standards
FCC Class B
Telephone: 1 360 925 5059 (direct)
Fax:
1 360 925 5143 (direct)
Email:
customerservice@xantrex.com